28
Oct
2025
FPS Food and Pharma Systems S.r.l.
Exhibitor at CPHI Frankfurt 2025 stand 9.0D57, Pharma Machinery and Equipment
About Us
Categories
-
IT -
2015On CPHI since
-
3Certificates
-
50 - 99Employees
Company types
Primary activities
Contact info
-
-
-
Via Romagnoli 3 , 29017 , Fiorenzuola d’Arda (PC), Italy
Event information
CPHI Frankfurt 2025
-
28 Oct 2025 - 30 Oct 2025
-
Messe, Frankfurt
-
Visit us at stand 9.0D57, Pharma Machinery and Equipment
Products Featured at CPHI Frankfurt 2025
-
Product Isolators for High Potency API Containment: Toxic Applications
FPS custom isolators are meticulously engineered to meet every requirement and to safeguard operators, products, and environments in toxic pharmaceutical applications.
Crafted from robust stainless steel, they offer unparalleled protection during micronization and beyond. Transparent acrylic parts ... -
Product Aseptic Isolators for Sterile Applications
FPS sterile containment systems maintain a sterile environment around processes, requiring minimal space and eliminating the necessity for sterile cleanrooms.
Our custom isolators are meticulously engineered to meet the highest pharmaceutical standards, ensuring impeccable sterile c... -
Product High Containment isolator for Micronization
The latest challenge was to design a multi-purpose isolator used to micronize down to a few microns covering a wide range of batch size and assuring a Containment Performance Target (CPT) of 50ng/m3. Inside the isolator, a 4”, 8” or 12” jet mill can be used. To achieve this, a 9-chamber isolator has been d... -
Product Sterile isolator for PilotMill-6
Benefits of FPS Solution:
• FPS provides both the containment system and the micronization unit • All components of the micronization units are designed to be connected to the Sterilization In Place line • Decontamination cycles specifically developed to guarantee an aseptic environment... -
Product Toxic Sterile Dispensing Isolator
FPS recently designed and manufactured an isolator to dispense up to 100kg of potent sterile API in specific containers to be connected to the process equipment.
During the discovery phase of the customer needs, the various stages of the process were analyzed:
1) introduction of th... -
Product Synthesis isolator - Isolators for HPAPI Production
Operations around chemical reactors, filters, centrifuges and dryers need to be executed under containment conditions when handling HPAPI or intermediates. Depending on process equipment dimensions, the isolator system is designed fully enclosing the equipment or only the parts where product transfer occur... -
Product Synthesis Isolator - Isolator for Synthesis, Filtration and drying
ANFD barrier isolator allows high active product discharge from filter dryers and heel removal for total product recovery. The isolator is directly supported by the filter dryer; installed on a flange fixed on the discharge hatch.Activities are performed by working through glove ports installed on front ... -
Product Process Vessel Charging - Isolator for HPAPI Production
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via... -
Product Process Vessel Discharging - Isolator for HPAPI Production
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via... -
Product Containment Systems for API Pilot Plant - Includes: Filtration, Milling, Dispensing and Packaging
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
Operator access to isolator inside... -
Product Isolator for Milling and Micronization - Pilot Size
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m. Proven solutions are available for laboratory, pilot unit or production units of: • Conical mills • Hammer mill •... -
Product Isolator for Milling and micronization - Production Size
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m.Proven solutions are available for laboratory, pilot unit or production units of: • Conical mills • Hammer mill • ... -
Product Sterile Contained PM8 Micronizing systems
The equipment, designed to be installed across different floors, is composed of a glovebox to discharge the batches from a filter dryer without affecting the product sterility; a jet mill isolator provides a confined environment in which the product is micronized; downflow booths are integrated on the ... -
Product Pack-off unit in Isolator
Pack-off systems assure product protection and reduce operator dust exposure during discharging operations from silos, bins, cyclones, driers, reactors, centrifuges, …
It is possible to install pack-off systems on existing equipment, reducing to a minimum the requested modification, in full compl... -
Product Multimilling Station in Isolator
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm.
Proven solutions are available for laboratory, pilot unit or production units of:
• Conical mills • Hamm... -
Product Multimilling Station
The multimilling station is the best choice for the execution of milling operations in research departments and pilot plants, with different technologies integrated on a single system.The platform considers:- • Spiral jet mill (type PILOTMILL-4, PILOTMILL-5 or PILOTMILL-6) • Pin mill 100 ... -
Product Sterile/Toxic Isolator
Containment systems for sterile applications may be proposed in the form of closed isolators or Restricted Access Barrier Systems (RABS).
A sterile isolator allows to avoid the use of sterile cleanrooms, reducing the sterile volume around the process being executed.
Turbulent or unidirectional fl... -
Product HPAPI Sterile Dispensing Isolator
Single chamber barrier isolator configured in order to grantthe dispensing procedure for API product achieving the followingtasks:• Assure a sterile environment inside the isolator. Assure operator protection, when the processedproducts are highly active.The barrier isolator operates under a positive ... -
Product Spiral Jet Mills series - R&D and laboratory - PilotMill-Zero
PilotMill-Zero represents the right solution for preliminary feasibility micronization trials with milligrams batches of New Chemical Entities, as well as of many other products.
• Based on the proven FPS Spiral Jet Mill technology • Designed to effectively operate despite the miniaturized dimensions ... -
Product Spiral Jet Mills series - R&D and laboratory - LaboMill/PilotMill-1
The LaboMill/PilotMill-1 is the FPS answer to R&D lab needs when it comes to very initial stages of development, when only extremely small "batch sizes" are available. This very limited amount of material - starting from 200 mg - asks for the use of very special equipment designed and develop... -
Product Qmills series - R&D and laboratory
The R&D QMill isengineered to meet the requirements of R&D labs, where new product are developed and micronization process is requested on small quantities (from minimum 1g to few kgs).
All connections of components are made to be in compliance with cGMPs and to assure quick a... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-2
The PilotMill-2 jet mill is designed for product research and developments needs, where batches from 1g to 3kg are considered. In function of these process condition, the PilotMill-2 jet mill has been designed to assure higher micronized product yield. It is available in top discharge ... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-3
The PilotMill-3 jet mill still more indicated for R&D activities, can start micronizing batch sizes as low as 3g with extremely contained product loss and can micronize batches up to approx. 10kg. It is available in top and bottom discharge configurations, to better fit different needs.
... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-4
The PilotMill-4 jet mill is designed for product developments needs, where batches from 5g to 60kg are considered. It is available in top and bottom discharge configurations, to better fit different needs.
The PilotMill-4 jet mill may be easily integrated into glove box systems to ... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-5
The PilotMill-5 jet mill is designed for product developments needs and small production campaigns, where batches from 100g to 100kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs. The PilotMill-5 jet mill may be easily integrated in... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-6
The PilotMill-6 jet mill is designed for product developments needs and small production campaigns, where batches from 500g to 250kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs.
The PilotMill-6 jet mill may be easily integrated in... -
Product Spiral Jet Mills series - Production Unit - PilotMill-8
The ProMill-8 jet mill is designed for production needs. The typical batch sizes is between 2kg and 1000kg. It’s available in two configurations, cosmetic/chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technica... -
Product Spiral Jet Mills series - Production Unit - ProMill-12
The ProMill-12 jet mill is designed for production needs. Typical batch sizes is between 5kg and 2500kg. It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technical trials ... -
Product Spiral Jet Mills series - Production Unit - ProMill-16
The ProMill-16 jet mill is designed for production needs. Typical batch sizes is between 20kg and 5000kg. It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technical trials with produ... -
Product Mechanical Mills - PinMill
FPS Mechanical Mills are designed to reduce agglomerates of pharmaceutical, chemical and food products down to fine size. The system includes hygienic design mill housing with interchangeable rotor and stator. The size reduction of the product is considered function of: • the product being proce... -
Product QMill series - Pilot Units - QMill-6 and QMill-8
The Pilot QMill series is able to meet the request for small production batch sizes (from 100g to hundreds of kg). All connections of components are made to be in compliance with cGMPs and to assure quick and easy assembling and disassembling operations. The number of components is reduced at minimum in o... -
Product QMill series - Production Units - QMill-10 and QMill-14
The Production QMill series is engineered to encounter the request from production facilities, where large volumes are processed in a flexible and efficient operation. All connections of components are made to be in compliance with cGMPs and to assure quick and easy assembling and disassembling operations... -
Product Highly potent - Formulation Isolator
Formulation operations involve a large number of process equipment and need to handle small or large batch size. -
Product Highly potent - Laboratory Isolator
Every time a HPAPI is manufactured, all laboratory activities are required with the same operator protection foreseen for process machines. -
Product Highly potent - Milling and Micronization Isolator
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm. -
Product Highly potent - Packaging
Final product packaging may need containment isolator as a final step of operator protection. -
Product Highly potent - Synthesis, Filtration and drying
Operations around chemical reactors, filters, centrifuges and dryers need to be executed under containment conditions when handling HPAPI or intermediates. -
Product Mechanical Mills - HammerMill-100
FPS Mechanical Mills are designed to reduce agglomerates of pharmaceutical, chemical and food products down to fine size. The system includes hygienic design mill housing with interchangeable rotor and stator. FPS Mechanical Mills available are: PinMill-100, PinMill-200, HammerMill-100 and H... -
Product Power Voice System
FPS is proud to introduce the first isolator with integrated vocal commands.
Containment systems allow the operator to handle highly toxic (HAPI and HPAPI) or sterile powders safely and efficiently. One of the main processes performed inside the isolator is the handling of powders... -
Product Spiral jet mill - Pilot Units
The PilotMill series is able to meet the request for laboratory needs and small production batch sizes (from 3g to 100kg). -
Product Spiral jet mill - Production Units
The ProMill series is engineered to encounter the request from production facilities, where large volumes are processed in a flexible and efficient operation. -
Product Spiral jet mill - R&D Units
The R&D Jet Mill series is engineered to meet the requirements of R&D labs, where new product are developed and micronization process is requested on small quantities (from minimum 10mg to 100g).
Position your company at the heart of the global Pharma industry with a CPHI Online membership
-
Your products and solutions visible to thousands of visitors within the largest Pharma marketplace
-
Generate high-quality, engaged leads for your business, all year round
-
Promote your business as the industry’s thought-leader by hosting your reports, brochures and videos within your profile
-
Your company’s profile boosted at all participating CPHI events
-
An easy-to-use platform with a detailed dashboard showing your leads and performance