Spiral Jet Mills series - Pilot Unit - PilotMill-5
Product Description
FPS Pharma
-
IT
-
2015On CPHI since
-
3Certificates
-
50 - 99Employees
Company types
Primary activities
Categories
Specifications
FPS Pharma
-
IT
-
2015On CPHI since
-
3Certificates
-
50 - 99Employees
Company types
Primary activities
More Products from FPS Pharma (41)
-
Product Spiral Jet Mills series - R&D and laboratory - PilotMill-Zero
PilotMill-Zero represents the right solution for preliminary feasibility micronization trials with milligrams batches of New Chemical Entities, as well as of many other products.
• Based on the proven FPS Spiral Jet Mill technology • Designed to effectively operate despite the miniaturized dimensions ... -
Product Spiral Jet Mills series - R&D and laboratory - LaboMill/PilotMill-1
The LaboMill/PilotMill-1 is the FPS answer to R&D lab needs when it comes to very initial stages of development, when only extremely small "batch sizes" are available. This very limited amount of material - starting from 200 mg - asks for the use of very special equipment designed and develop... -
Product Qmills series - R&D and laboratory
The R&D QMill isengineered to meet the requirements of R&D labs, where new product are developed and micronization process is requested on small quantities (from minimum 1g to few kgs).
All connections of components are made to be in compliance with cGMPs and to assure quick a... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-2
The PilotMill-2 jet mill is designed for product research and developments needs, where batches from 1g to 3kg are considered. In function of these process condition, the PilotMill-2 jet mill has been designed to assure higher micronized product yield. It is available in top discharge ... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-3
The PilotMill-3 jet mill still more indicated for R&D activities, can start micronizing batch sizes as low as 3g with extremely contained product loss and can micronize batches up to approx. 10kg. It is available in top and bottom discharge configurations, to better fit different needs.
... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-4
The PilotMill-4 jet mill is designed for product developments needs, where batches from 5g to 60kg are considered. It is available in top and bottom discharge configurations, to better fit different needs.
The PilotMill-4 jet mill may be easily integrated into glove box systems to ... -
Product Spiral Jet Mills series - Pilot Unit - PilotMill-6
The PilotMill-6 jet mill is designed for product developments needs and small production campaigns, where batches from 500g to 250kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs.
The PilotMill-6 jet mill may be easily integrated in... -
Product Spiral Jet Mills series - Production Unit - PilotMill-8
The ProMill-8 jet mill is designed for production needs. The typical batch sizes is between 2kg and 1000kg. It’s available in two configurations, cosmetic/chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technica... -
Product Spiral Jet Mills series - Production Unit - ProMill-12
The ProMill-12 jet mill is designed for production needs. Typical batch sizes is between 5kg and 2500kg. It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technical trials ... -
Product Spiral Jet Mills series - Production Unit - ProMill-16
The ProMill-16 jet mill is designed for production needs. Typical batch sizes is between 20kg and 5000kg. It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
At FPS R&D and test center it’s possible to perform technical trials with produ... -
Product Mechanical Mills - PinMill
FPS Mechanical Mills are designed to reduce agglomerates of pharmaceutical, chemical and food products down to fine size. The system includes hygienic design mill housing with interchangeable rotor and stator. The size reduction of the product is considered function of: • the product being proce... -
Product QMill series - Pilot Units - QMill-6 and QMill-8
The Pilot QMill series is able to meet the request for small production batch sizes (from 100g to hundreds of kg). All connections of components are made to be in compliance with cGMPs and to assure quick and easy assembling and disassembling operations. The number of components is reduced at minimum in o...
FPS Pharma resources (2)
-
News The FPS Pharma Engineering Process – Paolo Barilli
"We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer
Let's explore the FPS Pharma Engineering Process. -
Brochure Pharmaceutical Micronization and Milling Equipment
Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.
Position your company at the heart of the global Pharma industry with a CPHI Online membership
-
Your products and solutions visible to thousands of visitors within the largest Pharma marketplace
-
Generate high-quality, engaged leads for your business, all year round
-
Promote your business as the industry’s thought-leader by hosting your reports, brochures and videos within your profile
-
Your company’s profile boosted at all participating CPHI events
-
An easy-to-use platform with a detailed dashboard showing your leads and performance