QMill series - Pilot Units - QMill-6 and QMill-8

QMill series - Pilot Units - QMill-6 and QMill-8
Product Description

The Pilot QMill series is able to meet the request for small production batch sizes (from 100g to hundreds of kg). All connections of components are made to be in compliance with cGMPs and to assure quick and easy assembling and disassembling operations. The number of components is reduced at minimum in order to speed up also cleaning and validation activities.
The Pilot QMill  series jet mills may be easily integrated into FPS isolators to allow the process of very high active or sterile products.

The QMill-6 is required for final particle size between 15-20µm and 100µm (D50), Starting PSD of raw material is 2-3mm approx. It is engineered to give higher product yield with batch size from 100g to 100kg with productivity from 0.2 to 3 0kg/h.
The QMill-8 is required for final particle size between 15-20µm and 100µm (D50), Starting PSD of raw material is 2-3mm approx. It is engineered to give higher product yield with batch size from 1kg to 500kg with productivity is from 0.5 to 50 kg/h.

QMills technology is an alternative to mechanical mills. Interchangeable with spiral jet mills, QMill series is designed to be a pharmaceutical alternative to pin mills and hammer mills.
PLUS

  • Fluid jet mill type
  • Larger inlet PSD
  • Outlet PSD to 20 μm
  • Micronization of plastic type materials
  • High throughput
  • Interchangeable with spiral jet mills

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other
Specifications
  • Selling Points
    Brand Name; Convenience; Experienced Technicians; Price; Product Performance; Quality Service
  • Supplied from
    Italy
  • Measured In
    milligram

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other

More Products from FPS Pharma (41)

  • Spiral Jet Mills series - Pilot Unit -  PilotMill-5

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-5

    The PilotMill-5 jet mill is designed for product developments needs and small production campaigns, where batches from 100g to 100kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs. The PilotMill-5 jet mill may be easily integrated in...
  • Spiral Jet Mills series - Pilot Unit -  PilotMill-6

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-6

    The PilotMill-6 jet mill is designed for product developments needs and small production campaigns, where batches from 500g to 250kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs.
    The PilotMill-6 jet mill may be easily integrated in...
  • Spiral Jet Mills series - Production Unit -  PilotMill-8

    Product Spiral Jet Mills series - Production Unit - PilotMill-8

    The ProMill-8 jet mill is designed for production needs. The typical batch sizes is between 2kg and 1000kg.  It’s available in two configurations, cosmetic/chemical and pharmaceutical, to better-fit different requirements.
    At FPS R&D and test center it’s possible to perform technica...
  • Spiral Jet Mills series - Production Unit - ProMill-12

    Product Spiral Jet Mills series - Production Unit - ProMill-12

    The ProMill-12 jet mill is designed for production needs. Typical batch sizes is between 5kg and 2500kg.  It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
    At FPS R&D and test center it’s possible to perform technical trials ...
  • Spiral Jet Mills series - Production Unit - ProMill-16

    Product Spiral Jet Mills series - Production Unit - ProMill-16

    The ProMill-16 jet mill is designed for production needs. Typical batch sizes is between 20kg and 5000kg. It is available in two configurations, chemical and pharmaceutical, to better-fit different requirements.
    At FPS R&D and test center it’s possible to perform technical trials with produ...
  • Mechanical Mills - PinMill

    Product Mechanical Mills - PinMill

    FPS Mechanical Mills are designed to reduce agglomerates of pharmaceutical, chemical and food products down to fine size. The system includes hygienic design mill housing with interchangeable rotor and stator. The size reduction of the product is considered function of:  • the product being proce...
  • QMill series - Production Units - QMill-10 and QMill-14

    Product QMill series - Production Units - QMill-10 and QMill-14

    The Production QMill series is engineered to encounter the request from production facilities, where large volumes are processed in a flexible and efficient operation. All connections of components are made to be in compliance with cGMPs and to assure quick and easy assembling and disassembling operations...
  • Highly potent - Formulation Isolator

    Product Highly potent - Formulation Isolator

    Formulation operations involve a large number of process equipment and need to handle small or large batch size.
  • Highly potent - Laboratory Isolator

    Product Highly potent - Laboratory Isolator

    Every time a HPAPI is manufactured, all laboratory activities are required with the same operator protection foreseen for process machines.
  • Highly potent - Milling and Micronization Isolator

    Product Highly potent - Milling and Micronization Isolator

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm.
  • Highly potent - Packaging

    Product Highly potent - Packaging

    Final product packaging may need containment isolator as a final step of operator protection.
  • Highly potent - Synthesis, Filtration and drying

    Product Highly potent - Synthesis, Filtration and drying

    Operations around chemical reactors, filters, centrifuges and dryers need to be executed under containment conditions when handling HPAPI or intermediates.

FPS Pharma resources (2)

  • News The FPS Pharma Engineering Process – Paolo Barilli

    "We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer

    Let's explore the FPS Pharma Engineering Process.
  • Brochure Pharmaceutical Micronization and Milling Equipment

    Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.