Qmills series - R&D and laboratory

Qmills series - R&D and laboratory
Product Description

The R&D QMill isengineered to meet the requirements of R&D labs, where new product are developed and micronization process is requested on small quantities (from minimum 1g to few kgs).
All connections of components are made to be in compliance with cGMPs and to assure quick and easy assembling and disassembling operations. The number of components is reduced at minimum in order to speed up also cleaning and validation activities.
The R&D QMill may be easily integrated into FPS isolators to allow the process of very high active or sterile products

The QMill-2 is designed for R&D laboratory needs. Starting PSD of raw material is 1mm approx. Bench top design assures easy placement on any laboratory desk or hood.
The QMill-2 is engineered to give high product yield with batch size from 1g to 3kg with productivity from 0.01 to 1kg/h. The QMill-2 may be easily integrated within a FPS isolator system for the safe handing and processing of high potent API or toxic products.

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other
Specifications
  • Details
    Dimensions: 2", 6", 10", and 14" milling plate. Material: AISI316L. Gaskets: PTFE - FEP/Viton. Surface roughness: 25 µm - contact parts; < 0.80 µm. Working pressure: 2-12 barg
  • Selling Points
    Brand Name; Convenience; Experienced Technicians; Price; Product Performance; Quality Service
  • Supplied from
    Italy
  • Measured In
    milligram

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other

More Products from FPS Pharma (41)

  • Multimilling Station in Isolator

    Product Multimilling Station in Isolator

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm.
    Proven solutions are available for laboratory, pilot unit or production units of:
    •  Conical mills •  Hamm...
  • Multimilling Station

    Product Multimilling Station

    The multimilling station is the best choice for the execution of milling operations in research departments and pilot plants, with different technologies integrated on a single system.The platform considers:- •  Spiral jet mill (type PILOTMILL-4, PILOTMILL-5 or PILOTMILL-6) •  Pin mill 100 ...
  • Sterile/Toxic Isolator

    Product Sterile/Toxic Isolator

    Containment systems for sterile applications may be proposed in the form of closed isolators or Restricted Access Barrier Systems (RABS).
    A sterile isolator allows to avoid the use of sterile cleanrooms, reducing the sterile volume around the process being executed.
    Turbulent or unidirectional fl...
  • HPAPI Sterile Dispensing Isolator

    Product HPAPI Sterile Dispensing Isolator

    Single chamber barrier isolator configured in order to grantthe dispensing procedure for API product achieving the followingtasks:• Assure a sterile environment inside the isolator. Assure operator protection, when the processedproducts are highly active.The barrier isolator operates under a positive ...
  • Spiral Jet Mills series - R&D and laboratory - PilotMill-Zero

    Product Spiral Jet Mills series - R&D and laboratory - PilotMill-Zero

    PilotMill-Zero represents the right solution for preliminary feasibility micronization trials with milligrams batches of New Chemical Entities, as well as of many other products.
    • Based on the proven FPS Spiral Jet Mill technology • Designed to effectively operate despite the miniaturized dimensions ...
  • Spiral Jet Mills series - R&D and laboratory - LaboMill/PilotMill-1

    Product Spiral Jet Mills series - R&D and laboratory - LaboMill/PilotMill-1

    The LaboMill/PilotMill-1 is the FPS answer to R&D lab needs when it comes to very initial stages of development, when only extremely small "batch sizes" are available. This very limited amount of material - starting from 200 mg - asks for the use of very special equipment designed and develop...
  • Spiral Jet Mills series - Pilot Unit -  PilotMill-2

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-2

    The PilotMill-2 jet mill is designed for product research and developments needs, where batches from 1g to 3kg are considered. In function of these process condition, the PilotMill-2 jet mill has been designed to assure higher micronized product yield.  It is available in top discharge ...
  • Spiral Jet Mills series - Pilot Unit -  PilotMill-3

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-3

    The PilotMill-3 jet mill still more indicated for R&D activities, can start micronizing batch sizes as low as 3g with extremely contained product loss and can micronize batches up to approx. 10kg. It is available in top and bottom discharge configurations, to better fit different needs.
    ...
  • Spiral Jet Mills series - Pilot Unit -  PilotMill-4

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-4

    The PilotMill-4 jet mill is designed for product developments needs, where batches from 5g to 60kg are considered. It is available in top and bottom discharge configurations, to better fit different needs.

    The PilotMill-4 jet mill may be easily integrated into glove box systems to ...
  • Spiral Jet Mills series - Pilot Unit -  PilotMill-5

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-5

    The PilotMill-5 jet mill is designed for product developments needs and small production campaigns, where batches from 100g to 100kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs. The PilotMill-5 jet mill may be easily integrated in...
  • Spiral Jet Mills series - Pilot Unit -  PilotMill-6

    Product Spiral Jet Mills series - Pilot Unit - PilotMill-6

    The PilotMill-6 jet mill is designed for product developments needs and small production campaigns, where batches from 500g to 250kg are considered. It is available in top and bottom discharge configurations, to better-fit different needs.
    The PilotMill-6 jet mill may be easily integrated in...
  • Spiral Jet Mills series - Production Unit -  PilotMill-8

    Product Spiral Jet Mills series - Production Unit - PilotMill-8

    The ProMill-8 jet mill is designed for production needs. The typical batch sizes is between 2kg and 1000kg.  It’s available in two configurations, cosmetic/chemical and pharmaceutical, to better-fit different requirements.
    At FPS R&D and test center it’s possible to perform technica...

FPS Pharma resources (2)

  • News The FPS Pharma Engineering Process – Paolo Barilli

    "We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer

    Let's explore the FPS Pharma Engineering Process.
  • Brochure Pharmaceutical Micronization and Milling Equipment

    Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.