Process Vessel Discharging - Isolator for HPAPI Production
Product Description
FPS Pharma
-
IT
-
2015On CPHI since
-
3Certificates
-
50 - 99Employees
Company types
Primary activities
Categories
Specifications
FPS Pharma
-
IT
-
2015On CPHI since
-
3Certificates
-
50 - 99Employees
Company types
Primary activities
More Products from FPS Pharma (41)
-
Product High Containment isolator for Micronization
The latest challenge was to design a multi-purpose isolator used to micronize down to a few microns covering a wide range of batch size and assuring a Containment Performance Target (CPT) of 50ng/m3. Inside the isolator, a 4”, 8” or 12” jet mill can be used. To achieve this, a 9-chamber isolator has been d... -
Product Sterile isolator for PilotMill-6
Benefits of FPS Solution:
• FPS provides both the containment system and the micronization unit • All components of the micronization units are designed to be connected to the Sterilization In Place line • Decontamination cycles specifically developed to guarantee an aseptic environment... -
Product Toxic Sterile Dispensing Isolator
FPS recently designed and manufactured an isolator to dispense up to 100kg of potent sterile API in specific containers to be connected to the process equipment.
During the discovery phase of the customer needs, the various stages of the process were analyzed:
1) introduction of th... -
Product Synthesis isolator - Isolators for HPAPI Production
Operations around chemical reactors, filters, centrifuges and dryers need to be executed under containment conditions when handling HPAPI or intermediates. Depending on process equipment dimensions, the isolator system is designed fully enclosing the equipment or only the parts where product transfer occur... -
Product Synthesis Isolator - Isolator for Synthesis, Filtration and drying
ANFD barrier isolator allows high active product discharge from filter dryers and heel removal for total product recovery. The isolator is directly supported by the filter dryer; installed on a flange fixed on the discharge hatch.Activities are performed by working through glove ports installed on front ... -
Product Process Vessel Charging - Isolator for HPAPI Production
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via... -
Product Containment Systems for API Pilot Plant - Includes: Filtration, Milling, Dispensing and Packaging
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
Operator access to isolator inside... -
Product Isolator for Milling and Micronization - Pilot Size
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m. Proven solutions are available for laboratory, pilot unit or production units of: • Conical mills • Hammer mill •... -
Product Isolator for Milling and micronization - Production Size
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m.Proven solutions are available for laboratory, pilot unit or production units of: • Conical mills • Hammer mill •  ... -
Product Sterile Contained PM8 Micronizing systems
The equipment, designed to be installed across different floors, is composed of a glovebox to discharge the batches from a filter dryer without affecting the product sterility; a jet mill isolator provides a confined environment in which the product is micronized; downflow booths are integrated on the ... -
Product Pack-off unit in Isolator
Pack-off systems assure product protection and reduce operator dust exposure during discharging operations from silos, bins, cyclones, driers, reactors, centrifuges, …
It is possible to install pack-off systems on existing equipment, reducing to a minimum the requested modification, in full compl... -
Product Multimilling Station in Isolator
Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm.
Proven solutions are available for laboratory, pilot unit or production units of:
• Conical mills • Hamm...
FPS Pharma resources (2)
-
News The FPS Pharma Engineering Process – Paolo Barilli
"We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer
Let's explore the FPS Pharma Engineering Process. -
Brochure Pharmaceutical Micronization and Milling Equipment
Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.
Position your company at the heart of the global Pharma industry with a CPHI Online membership
-
Your products and solutions visible to thousands of visitors within the largest Pharma marketplace
-
Generate high-quality, engaged leads for your business, all year round
-
Promote your business as the industry’s thought-leader by hosting your reports, brochures and videos within your profile
-
Your company’s profile boosted at all participating CPHI events
-
An easy-to-use platform with a detailed dashboard showing your leads and performance