Pack-off unit in Isolator

Pack-off unit in Isolator
Product Description

Pack-off systems assure product protection and reduce operator dust exposure during discharging operations from silos, bins, cyclones, driers, reactors, centrifuges, …
It is possible to install pack-off systems on existing equipment, reducing to a minimum the requested modification, in full compliance with all the final customer standard.
Custom designed configurations are also available integrated with:

  • weighting platform
  • dosing valve
  • sampling system
  • continuous liner 
  • inflating head
  • horizontal flow booths

FPS Food and Pharma Systems S.r.l. offers a wide range of containment solution products which includes pack-off units. It  assure the product protection and reduce operator exposure to dust (oel) during discharging operations from silos, bins, cyclones, driers, reactors. The basic system is composed of an inflating head that assures no powder leakage after sealing to the plastic bag where the discharged product is collected. The adoption of an horizontal laminar flow booth with hepa filters or a suction booth around the inflating head together with the use of a continuous liner increase operator and environment protection (containment level up to oeb3). It is possible to install pack-off systems on existing equipment, reducing to a minimum the requested modification, in full compliance with all the final customer standard. 

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other
Specifications
  • Details
    Dimensions: Hose: Ø150; Ø350mm. Gasket: Silicone. Surface roughness: < 0.25 µm - contact parts; < 0.80 µm
  • Selling Points
    Quality Service
  • Supplied from
    Italy

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other

More Products from FPS Pharma (41)

  • Process Vessel Charging - Isolator for HPAPI Production

    Product Process Vessel Charging - Isolator for HPAPI Production

    Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via...
  • Process Vessel Discharging - Isolator for HPAPI Production

    Product Process Vessel Discharging - Isolator for HPAPI Production

    Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via...
  • Containment Systems for API Pilot Plant - Includes: Filtration, Milling, Dispensing and Packaging

    Product Containment Systems for API Pilot Plant - Includes: Filtration, Milling, Dispensing and Packaging

    Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
    Operator access to isolator inside...
  • Isolator for Milling and Micronization - Pilot Size

    Product Isolator for Milling and Micronization - Pilot Size

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m. Proven solutions are available for laboratory, pilot unit or production units of: •  Conical mills •  Hammer mill •...
  • Isolator for Milling and micronization - Production Size

    Product Isolator for Milling and micronization - Production Size

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m.Proven solutions are available for laboratory, pilot unit or production units of: •  Conical mills •  Hammer mill •  ...
  • Sterile Contained PM8 Micronizing systems

    Product Sterile Contained PM8 Micronizing systems

    The equipment, designed to be installed across different floors, is composed of a glovebox to discharge the batches from a filter dryer without affecting the product sterility; a jet mill isolator provides a confined environment in which the product is micronized; downflow booths are integrated on the ...
  • Multimilling Station in Isolator

    Product Multimilling Station in Isolator

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm.
    Proven solutions are available for laboratory, pilot unit or production units of:
    •  Conical mills •  Hamm...
  • Multimilling Station

    Product Multimilling Station

    The multimilling station is the best choice for the execution of milling operations in research departments and pilot plants, with different technologies integrated on a single system.The platform considers:- •  Spiral jet mill (type PILOTMILL-4, PILOTMILL-5 or PILOTMILL-6) •  Pin mill 100 ...
  • Sterile/Toxic Isolator

    Product Sterile/Toxic Isolator

    Containment systems for sterile applications may be proposed in the form of closed isolators or Restricted Access Barrier Systems (RABS).
    A sterile isolator allows to avoid the use of sterile cleanrooms, reducing the sterile volume around the process being executed.
    Turbulent or unidirectional fl...
  • HPAPI Sterile Dispensing Isolator

    Product HPAPI Sterile Dispensing Isolator

    Single chamber barrier isolator configured in order to grantthe dispensing procedure for API product achieving the followingtasks:• Assure a sterile environment inside the isolator. Assure operator protection, when the processedproducts are highly active.The barrier isolator operates under a positive ...
  • Spiral Jet Mills series - R&D and laboratory - PilotMill-Zero

    Product Spiral Jet Mills series - R&D and laboratory - PilotMill-Zero

    PilotMill-Zero represents the right solution for preliminary feasibility micronization trials with milligrams batches of New Chemical Entities, as well as of many other products.
    • Based on the proven FPS Spiral Jet Mill technology • Designed to effectively operate despite the miniaturized dimensions ...
  • Spiral Jet Mills series - R&D and laboratory - LaboMill/PilotMill-1

    Product Spiral Jet Mills series - R&D and laboratory - LaboMill/PilotMill-1

    The LaboMill/PilotMill-1 is the FPS answer to R&D lab needs when it comes to very initial stages of development, when only extremely small "batch sizes" are available. This very limited amount of material - starting from 200 mg - asks for the use of very special equipment designed and develop...

FPS Pharma resources (2)

  • News The FPS Pharma Engineering Process – Paolo Barilli

    "We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer

    Let's explore the FPS Pharma Engineering Process.
  • Brochure Pharmaceutical Micronization and Milling Equipment

    Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.