Isolator for Milling and Micronization - Pilot Size

Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m. Proven solutions are available for laboratory, pilot unit or production units of:

•  Conical mills
•  Hammer mill
•  Pin Mills
•  Fluid energy mills (jet mill and QMills)

 Also containment of cryogenic milling operations is assured. Glove ports or half suits configurations are available depending on space availability and operator ergonomics.
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
Operator access to isolator inside via glove ports or half-suit configuration.
Containment levels from 10µg/m3 down to 0,01µg/m3 are available, with different manufacturing solutions and configurations.
Negative pressure isolators are available for many applications:

• mechanical or fluid energy mills
• dryers
• product synthesis
• dispensing and sampling
• formulation and packaging
• laboratory
• In Process Control
• Compounding...