Synthesis isolator - Isolators for HPAPI Production

Synthesis isolator - Isolators for HPAPI Production
Product Description

Operations around chemical reactors, filters, centrifuges and dryers need to be executed under containment conditions when handling HPAPI or intermediates. Depending on process equipment dimensions, the isolator system is designed fully enclosing the equipment or only the parts where product transfer occurs.
Typical applications are:

  • Reactor charging, with manual operations or drum tilting system;
  • Centrifuge discharge;
  • ANFD discharge, including final product packing in drums or IBC; 
  • Tray dryer charging / discharging.
Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
Operator access to isolator inside via glove ports or half-suit configuration.
Containment levels from 10µg/m3 down to 0,01µg/m3 are available, with different manufacturing solutions and configurations.
Negative pressure isolators are available for many applications:
  • mechanical or fluid energy mills
  • dryers 
  • product synthesis
  • dispensing and sampling
  • formulation and packaging
  • laboratory
  • In Process Control
  • Compounding...

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other
Specifications
  • Selling Points
    Quality Service
  • Supplied from
    Italy
  • Measured In
    milligram

FPS Pharma

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 50 - 99
    Employees
Company types
Consultancy
Engineering
Machinery and Equipment Supplier/Manufacturer
Manufacturer/Innovator
Primary activities
Cleanroom Technology
Laboratory, Analytical, Biotechnology Equipment
Other

More Products from FPS Pharma (41)

  • Spiral jet mill - R&D Units

    Product Spiral jet mill - R&D Units

    The R&D Jet Mill series is engineered to meet the requirements of R&D labs, where new product are developed and micronization process is requested on small quantities (from minimum 10mg to 100g).
  • Isolators for High Potency API Containment: Toxic Applications

    Product Isolators for High Potency API Containment: Toxic Applications

    FPS custom isolators are meticulously engineered to meet every requirement and to safeguard operators, products, and environments in toxic pharmaceutical applications.

    Crafted from robust stainless steel, they offer unparalleled protection during micronization and beyond. Transparent acrylic parts ...
  • Aseptic Isolators for Sterile Applications

    Product Aseptic Isolators for Sterile Applications

    FPS sterile containment systems maintain a sterile environment around processes, requiring minimal space and eliminating the necessity for sterile cleanrooms.
    Our custom isolators are meticulously engineered to meet the highest pharmaceutical standards, ensuring impeccable sterile c...
  • High Containment isolator for Micronization

    Product High Containment isolator for Micronization

    The latest challenge was to design a multi-purpose isolator used to micronize down to a few microns covering a wide range of batch size and assuring a Containment Performance Target (CPT) of 50ng/m3. Inside the isolator, a 4”, 8” or 12” jet mill can be used. To achieve this, a 9-chamber isolator has been d...
  • Sterile isolator for PilotMill-6

    Product Sterile isolator for PilotMill-6

    Benefits of FPS Solution:
    • FPS provides both the containment system and the micronization unit • All components of the micronization units are designed to be connected to the Sterilization In Place line • Decontamination cycles specifically developed to guarantee an aseptic environment...
  • Toxic Sterile Dispensing Isolator

    Product Toxic Sterile Dispensing Isolator

    FPS recently designed and manufactured an isolator to dispense up to 100kg of potent sterile API in specific containers to be connected to the process equipment.

    During the discovery phase of the customer needs, the various stages of the process were analyzed:
    1) introduction of th...
  • Synthesis Isolator - Isolator for Synthesis, Filtration and drying

    Product Synthesis Isolator - Isolator for Synthesis, Filtration and drying

    ANFD barrier isolator allows high active product discharge from filter dryers and heel removal for total product recovery. The isolator is directly supported by the filter dryer; installed on a  flange fixed on the discharge hatch.Activities are performed by working through glove ports installed on front ...
  • Process Vessel Charging - Isolator for HPAPI Production

    Product Process Vessel Charging - Isolator for HPAPI Production

    Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via...
  • Process Vessel Discharging - Isolator for HPAPI Production

    Product Process Vessel Discharging - Isolator for HPAPI Production

    Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via...
  • Containment Systems for API Pilot Plant - Includes: Filtration, Milling, Dispensing and Packaging

    Product Containment Systems for API Pilot Plant - Includes: Filtration, Milling, Dispensing and Packaging

    Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
    Operator access to isolator inside...
  • Isolator for Milling and Micronization - Pilot Size

    Product Isolator for Milling and Micronization - Pilot Size

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m. Proven solutions are available for laboratory, pilot unit or production units of: •  Conical mills •  Hammer mill •...
  • Isolator for Milling and micronization - Production Size

    Product Isolator for Milling and micronization - Production Size

    Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m.Proven solutions are available for laboratory, pilot unit or production units of: •  Conical mills •  Hammer mill •  ...

FPS Pharma resources (2)

  • News The FPS Pharma Engineering Process – Paolo Barilli

    "We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer

    Let's explore the FPS Pharma Engineering Process.
  • Brochure Pharmaceutical Micronization and Milling Equipment

    Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.