Isolator for Milling and micronization - Production Size

Operations around chemical reactors, filters, centrifuges and dryers need to be executed under containment conditions when handling HPAPI or intermediates. Depending on process equipment dimensions, the isolator system is designed fully enclosing the equipment or only the parts where product transfer occur...

ANFD barrier isolator allows high active product discharge from filter dryers and heel removal for total product recovery. The isolator is directly supported by the filter dryer; installed on a  flange fixed on the discharge hatch.Activities are performed by working through glove ports installed on front ...

Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via...

Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.Operator access to isolator inside via...

Production and handling of HPAPI or toxic products (in gas or powder form) need the total product separation from the environment to protect operators. Negative pressure regime is maintained within the closed volume of the isolator. Turbulent flow is generally adopted.
Operator access to isolator inside...

Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few m. Proven solutions are available for laboratory, pilot unit or production units of: •  Conical mills •  Hammer mill •...

The equipment, designed to be installed across different floors, is composed of a glovebox to discharge the batches from a filter dryer without affecting the product sterility; a jet mill isolator provides a confined environment in which the product is micronized; downflow booths are integrated on the ...

Pack-off systems assure product protection and reduce operator dust exposure during discharging operations from silos, bins, cyclones, driers, reactors, centrifuges, …
It is possible to install pack-off systems on existing equipment, reducing to a minimum the requested modification, in full compl...

Milling operations may result in dust clouds, exposing operators and environment to HPAPI, due to high energy involved in process operations and size reduction down to few μm.
Proven solutions are available for laboratory, pilot unit or production units of:
•  Conical mills •  Hamm...

The multimilling station is the best choice for the execution of milling operations in research departments and pilot plants, with different technologies integrated on a single system.The platform considers:- •  Spiral jet mill (type PILOTMILL-4, PILOTMILL-5 or PILOTMILL-6) •  Pin mill 100 ...

Containment systems for sterile applications may be proposed in the form of closed isolators or Restricted Access Barrier Systems (RABS).
A sterile isolator allows to avoid the use of sterile cleanrooms, reducing the sterile volume around the process being executed.
Turbulent or unidirectional fl...

Single chamber barrier isolator configured in order to grantthe dispensing procedure for API product achieving the followingtasks:• Assure a sterile environment inside the isolator. Assure operator protection, when the processedproducts are highly active.The barrier isolator operates under a positive ...

"We are highly specialised in the design and manufacture of custom isolators for potent active ingredients and sterile solutions. Our collaborative design process includes creating full-scale mock-ups to validate ergonomics and functionality, ensuring tailored solutions for each client." - Paolo Barilli - FPS Pharma Process Engineer

Let's explore the FPS Pharma Engineering Process.

Explore FPS’ micronization and jet milling systems. Achieve exact PSD targets, enhanced bioavailability, and cGMP compliance for superior formulations.

At FPS Pharma, the creation of custom isolators is more than a process; it’s a journey of collaboration, innovation, and precision.
From the moment customer needs are reviewed to the final testing phase, every step of the design and production process is meticulously carried out at our Fiorenzuola d’Arda (PC) plant.

Central to this journey is the mock-up phase—a pivotal step that brings the isolator to life at full scale.
FPS Pharma strongly encourages the use of mock-ups, allowing customers to physically interact with the isolator and assess its ergonomics and functionality before final production.

Discover FPS’ isolators for aseptic processing. Ensure sterility, safety, and cGMP compliance, tailored to your production requirements and plant space.

Discover how to optimize pharmaceutical HPAPI processing with FPS’ advanced containment isolators. Ensure top-tier safety, compliance, and efficiency.

Discover GloveXpert: the ultimate glove leak tester for pharmaceutical isolators. Fast, accurate, ergonomic, and lightweight. Visit our booth to test it!