TD - cGMP Tray Dryer

TD - cGMP Tray Dryer
Product Description

The Tray Dryers type TD are designed for the hot air drying of hard goods, powders and granulates. The drying process is by means of dry heat at 70-120 °C / 158- 250°F maintained for a controlled period of time.
The Tray Dryers are designed to withstand to maximum drying temperature of 120 °C / 250°F. Very good hot air distribution (temperature deviation below ± 5 °C / 41°F) guaranteed during entire cycle (heating, drying and cooling phases). 

Product drying occurs through its exposure to filtered hot air during a preset time.
The machine size and time of exposure depends on the quantity and density of the product to be dried.
A humidity probe can be applied in the chamber to control the residual humidity during the process while clamp connections are present on the chamber walls for validation procedures.
Air heating medias are: electricity, hot water or steam.

At the end of the process the chamber is cooled down by an heat exchanger functioning with cold water.

LAST Technology SrL

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 25 - 49
    Employees
Company types
Engineering
Manufacturer/Innovator
Specifications

LAST Technology SrL

  • IT
  • 2015
    On CPHI since
  • 3
    Certificates
  • 25 - 49
    Employees
Company types
Engineering
Manufacturer/Innovator

More Products from LAST Technology SrL (8)

  • RSA - cGMP Regular Steam Autoclave

    Product RSA - cGMP Regular Steam Autoclave

    RSA provides sterilization process to enables the inactivation of microorganism through  the action of moisture heat, pressure and vacuum.
    Designed for processing metal parts, plastic and rubber components, liquids in sealed or vented containers, filter cartridges or clothes.

    ...
  • TS-AS - cGMP Terminal Sterilizer

    Product TS-AS - cGMP Terminal Sterilizer

    The Sterilizers type TS-AS are specifically designed for the Terminal Sterilization of liquids contained in sealed containers (plastic bags, glass bottles, BFS bottles, syringes, ampoules, etc...) as they are prepared to provide automatic differential pressure compensation based on product probes (RTD...
  • TS-OW - cGMP Terminal Sterilizer

    Product TS-OW - cGMP Terminal Sterilizer

    The Sterilizers type TS-OW are specifically designed for the Terminal Sterilization of liquids contained in sealed containers (plastic bags, glass bottles, BFS bottles, syringes, ampoules, etc.) as they are prepared to provide automatic differential pressure compensation based on product probes (RTD) tempe...
  • DHS - cGMP Dry Heat Sterilizer

    Product DHS - cGMP Dry Heat Sterilizer

    The Dry Heat Sterilizers type DHS are designed for sterilization and depyrogenation by hot air in Class 100 (ISO 5) of empty glass containers such as vials, ampoules, bottles and stainless steel parts. The inactivation and destroying of micro-organisms is by means of dry heat at 250-300 °C / 480-570° F mai...
  • NEBULA - cGLP Steam Autoclave

    Product NEBULA - cGLP Steam Autoclave

    The Autoclaves type NEBULA are designed for the sterilization by clean saturated steam of heat-resistant and moisture-stable materials such as metal parts, plastic and rubber components, liquids in sealed or vented containers, filter cartridges, clothes, etc...

    Pre-selected and...
  • UCW - cGMP Glassware & Parts Washer

    Product UCW - cGMP Glassware & Parts Washer

    The machines types UCW are designed for process washing and drying of utensils, glassware, filling machines parts, etc...

    PLC pre-installed programs – fully customizable. Adjustable pre-wash, wash and final rinse water temperature up to 95 °C.    
    From dirty to produc...
  • UCW - Glassware, parts and large container washer

    Product UCW - Glassware, parts and large container washer

    The UCW equipment is an industrial parts washing machine specifically designed to process wash, disinfect and dry instruments, glassware, filling machine components and large containers (IBC), etc.

    WORKING PROGRAMS
    •PLC pre-installed programs – total of 100 customizable programs •A...
  • UCW - Parts and Bin washer

    Product UCW - Parts and Bin washer

    The UCW equipment is an industrial parts washing machine specifically designed to process wash, disinfect and dry instruments, glassware, filling machine components and large containers (IBC), etc.

    WORKING PROGRAMS
    •PLC pre-installed programs – total of 100 customizable programs •A...

LAST Technology SrL resources (1)