Stand Alone Incubator (Cooling & Heating/ Heating)

Allyone’s top of the line Cooling Incubators are the most preferred choice to maintain accurate temperature & its uniformity throughout the chamber where high degree of constant temperature accuracy is required.

Incubators are mainly used for the growth & storage of bacterial cultures, Media Preparation, gentle incubation & conditioning and other purposes.  

INCUBATOR HEATING: Incubator (Heating) are also known commonly as Bacteriological incubator:

This type of incubator is used majorly in laboratories mainly for the growth of bacterial cultures. it has a simple mechanism which maintains a constant set temperature as per the requirement. Accurate temperature maintained in the chamber is displayed on the display of incubator.

Most of the incubators are programmable and can be set as per the requirement. These types of incubators comes only with a heating system which maintains the temperature for growth of bacteria. These incubators are affected by temperature of surrounding environment so the prescribed set point is 10°C above ambient temperature hence no cooling system is required or present in these chambers.

Technical Specifications 

INCUBATOR COOLING & HEATING 
Temperature Range: 20°C to 60°C
Accuracy :< ± 0.2°C
Uniformity :< ± 1.0°C* 

INCUBATOR HEATING
Temperature Range : 10°C above ambient to 60°C
Accuracy :< ± 0.2°C
Uniformity : < ± 1.0°C*

Standard Chamber Features & Provisions:

Construction: Dynamically Designed PUF filled Double walled, Inner Tank & outer body with SS 304 PUF Density of 40 kg/m3 Thickness 60mm.

Sample Storage:
Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Door: 
PUF Insulated External door mounted with imported hinges & locks, Inner glass doors with latches. Door frame is secured with silicone rubber gasket on entire perimeter to ensure air tight, leak tight chamber.

Door Operation: Biometric &/or Password protected-from software & HMI

Control System: Ergonomically designed Control Panel.
Ferrule printed wiring.

Advanced PLC Program with built in processor-based Auto Tuning.

4.3” HMI Color LCD Display.

Built in Redundancy & Safety.

Advanced High Accuracy “Transmitter Sensors” with output of 4-20 mA.

Temperature Control: Efficient, Reliable, Time tested & Trustworthy Refrigeration Design.

Built in redundancy with PLC based Auto Change Over during power outage &/or component failure (Compressor)

PLC Controlled “U” Shaped SS Air Heater Banks.

Optional Backup System: PLC based Auto Change Over Backup system for Refrigeration.

Safety: Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature.

PLC Safety Cut Off for Temperature: High, Higher & Low, Lower safety cut off.


The capacities of Stand Alone Chambers : 150, 250,400,500,600,800.1000 lt.