Silicone Corks and Stopper

Autoclave Gaskets Feature:
• Autoclavable Gaskets for PharmaLab/ Machinefabric/ Fedegari or custom built.  • Autoclavable Gasket are also available as inflatable gasket.  • Excellent joint finishing from european technology of manufacturing.
NOTE: Price vary as per si...

APPL offers a wide range of cords in silicone rubber ranging from 0.5 mm to 50 mm in square and round sections. These cords are manufactured by step molding process as well as from microwave continuous curing system depending upon the customers requirements. Both of these processes are well advanc...

APPL offers it's wide range of O-Rings from 1.0 mm ID to 600 mm ID from its 5000 single piece moulds. APPL's O-Rings are manufactured on a hydraulic press with tightly controlled temperature, pressure and time which ensures accurate dimensions, glossy finish & invisible flash line, proper...

APPL's Silicone, Viton® EPDM Encapsulated O-Rings with FEP encapsulation are designed to address the growing problem of sealing in the most hostile chemical and temperature environments. It combines the best qualities of FEP material on the outside with its chemical inertness and an elastomer on the inside...

APPL’s di-electric silicone sleeve manufactured from a very specific silicone rubber compound, providing excellent electrical, thermal and chemical resistance, making it ideally suited to the harsh environment that is the corona treatment process. APPL's silicone sleeves are produced specifically ...

APPL's high quality silicone sheets conforms to FDA 21 CFR 177.2600 grade. These sheets are processed in high-pressure hydraulic moulding machines by accurately controlling the temperature and pressure, which ensures uniform physical properties of the sheets. APPL’s silicone sheets are available in...

Key Features:
1. Complies with FDA 21 CFR 177.2600 
2. Antistatic properties to dissipate charges through rubber surface volume 
3. Used for flammable solvent transfer peristaltic pump application 
4. Non-transparent color (milky white or black) 
5. Available in 60 Shor...

Advantage of EPDM self Adhesive Strip:
Easy to install, just peel off the self adhesive backing. The adhesive backing tape used is not fully resistance to water, therefore where there is a large amount of moisture or water present; it is advisable to use plain expanded EPDM a good conduct adhe...

Imapex®  peroxide grade silicone tubing is designed for general, non critical applications. Imapex®  is translucent silicone tubing having good flexibility and resiliency. It is suitable for peristaltic pump applications for non critical fluid transfer.
Imapex®  Ch...

Imavacfit® is platinum cured silicone hose reinforced with SS 316L helical wire and polyester braiding having better flexibility with high pressure resistance. Imavacfit® is having high burst pressure rating along with high vacuum resistance compare to Imavac™. The product is suitabl...

A sieve or sifter, is a device for separating wanted elements from unwanted material or for characterizing the particle size distribution of a sample, typically using a woven screen such as a mesh.Sifting is mainly used in two areas, Check screening of raw material to remove extraneous material and Sizing ...

With the support of talented professionals, we are passionately engaged in offering high quality Silicone Bellow. Widely demanded in the industry, the offered bellow is highly used for protecting machine parts from dust and corrosion. Keeping in mind the varied requirements of our precious clients, we make...

Our Ready to use Single use assemblies have the below features:

• Made of tubings, PP connectors (Tri-clovers, Straight connectors, Y/ T/ X  connectors), Aseptic Connectors, Filters, Bags, Manifolds etc.
• Manufactured and Packaged in Clean room of Class 10,000
• Gamma irradiated for 25- 45 kGy for SAL Up to 10–6
• Validated for Bioburden, Sterility Assurance Level and USP 788 Particulate testing 

Ami Polymer Pvt. Ltd. (APPL) was established in 1996 with the aim of being global leaders in field of silicone rubber product solutions to Food, Pharma and Engineering sectors. APPL is having dedicated manufacturing Clean Room facility of class 10000 in Silvassa (DNH) and distribution network in more than 20 countries including UK, USA. 1st Indian silicone product manufacturing company to have TOXIKON based E&L Studies, USP Class VI (USP 87 in vitro) for Platinum Cured Silicone Tubing & NSF-51 Certification. 

It is taking immense pleasure to announce about Our New APPL Facility (2,50,000 Sq. Ft. Area), which will be launched by end of the Year 2021 at Silvassa, DNH, India. New facility will be have technologically advanced Clean rooms ( From Class 100 to 100000) with latest extrusion/ Moulding/ Assembling Capacity.