EPDM Self Adhesive Strip Gasket

Advantage of EPDM self Adhesive Strip:
Easy to install, just peel off the self adhesive backing. The adhesive backing tape used is not fully resistance to water, therefore where there is a large amount of moisture or water present; it is advisable to use plain expanded EPDM a good conduct adhesive. EPDM provide excellent resistance against oil, acid alkalis has good weathering, heat ozone resistance.

Technical Properties (Summary):
Material  : EPDM Sponge
Color : Any
Density : 0.65 g/cm³
Shore Hardness : 45±5 (Shore ‘00’) / <5 (Shore ‘A’)*
Tensile Strength : 14 n/mm²
Elongation at Break : 110%
Min. Temperature : -30°C
Max. Temperature : +110°C
Ozone Resistance : No Crack 200pphm x 40C x 72h 20%
Compression Set : 16%

Highlighted Points:

• Small large quantities of EPDM sponge strip available. We are manufacturing EPDM sponge strip in both small runs large runs, so regardless of the size of your order APPL can deliver any size.
• EPDM sponge strips are currently supplied in two different colors: Black, White, Gray, Green, Red, Brown, etc. Our EPDM sponge strips compress when pressure is applied to them, meaning that when teo mating surface are put either side of the strip, that a seal is created.
• Bespoke custom EPDM sponge strip are available. We can produce cut lengths to fit a particular design, or even join standard 25 meter rolls to provide longer roll lengths if required. 
• Various densities of EPDM sponge strip. Our standard range of EPDM sponge strips are supplied in a medium density, but firm grades as well as softer grades are also readily available depending on the application. Firm grade EPDM sponge strip are supplied mainly when two heavy surfaces are claming down onto the strip, but only little compression is required to seal.