- Home
- Tubex Tubenfabrik Wolfsberg GmbH
- The Blue Tube Evo
CPHI Online is the largest global marketplace in the pharma ingredients industry
-
Products0
-
Companies0
-
Articles0
-
Events0
-
Webinars0
The Blue Tube Evo

Product Description
The Blue Tube Evo was the world’s first tube to be made of 100% recycled aluminium. And it closes the loop by incorporating aluminium packaging that has been used and thrown away by end-consumers. The Blue Tube Evo is the result of an innovative and future-focused eco-design approach. It offers a wealth of benefits for both your product and the planet.
The Blue Tube Evo closes the packaging-to-packaging loop by bringing post-consumer recycled aluminium packaging back into tube production. Made of 95% post-consumer and 5% post-industrial recycled aluminium, the Blue Tube Evo is perfectly designed for a circular economy – and for meeting consumer needs and legislative requirements.
Thanks to the use of recycled materials and highly carbon sensitive production throughout our supply chain, the Blue Tube Evo’s carbon footprint is up to 70% smaller when compared to a standard aluminium tube (global average).
Tubex Tubenfabrik Wolfsberg GmbH

-
AT
-
2015On CPHI since
-
3Certificates
-
500 - 999Employees
-
Anna AvramenkoSt Stefan, Austria
-
-
-
-
-
Categories
Specifications
- Selling PointsPackaging
- ModelAluminium tube
Tubex Tubenfabrik Wolfsberg GmbH

-
AT
-
2015On CPHI since
-
3Certificates
-
500 - 999Employees
-
Anna AvramenkoSt Stefan, Austria
-
-
-
-
-
More Products from Tubex Tubenfabrik Wolfsberg GmbH (2)
-
Product Aluminium Tubes
For generations, aluminium tubes have been the first-choice packaging for highly sensitive products. Today, more than a century after the tubes were invented, they have lost none of their appeal. No other material protects so effectively against light, air and other environmental factors, and naturally gua... -
Product The Monotube
The Monotube is made of 100% recycled aluminium (95% post-consumer and 5% post-industrial recycled aluminium). It is infinitely recyclable and has an aluminium closure instead of a plastic cap, which makes the tube even easier to recycle. Because every part of the Monotube is produced from a single materia...
Frequently Viewed Together
-
Product Square drums
Square Drums increase pallet density and are as easy to open and close as Wide Neck Drums, thanks to their signature screw top closure. Clean, safe, and fully certified!
Plastic High Performance Packaging by CurTec is clean, safe, and secure and offers maximum protection to active ingredients, exc... -
Product Sustainable laminated tubes
We offer two options for sustainable tubes:
PCR Tubes, manufactured using Post-Consumer Recycled Plastic, minimizing plastic waste.
Paper tubes, manufactured with a paper barrier to drastically reduce the use of plastic, providing a great alternative to plastic tubes for your products.
-
Product Cleanroom-Master®
flexible Pharma- & Cleanroom Packaging
Manufacturing conditions in accordance with DIN ISO 14644-1, ISO Class 5 of GMP-Class B
Characteristics:
-fexible LDPE fillm
-heat-sealable
-sterilisable,-lowest particle- & microbiological contamination
Approvals: ... -
Product Container Closure Systems
Closures
In partnership with our trusted partners, we deliver comprehensive packaging solutions.
Our range of plastic closures for effervescent tablet tubes matches containers made from plastic, glass, or aluminum. Optionally featuring integrated desiccants, these closure systems ... -
Product CordenPharma Pharma Packaging & Logistics
• PACKAGING DEVELOPMENT - CordenPharma manages all the logistical procedures involved in packaging development by creating and producing your packaging components. From layout development and producing a printable copy to procuring the materials, we work with creativity and precision. • PACKAGING -&... -
Product Lidding
Whether from the reel, as die-cut lids, or specific defined applications, our lidding solutions provide optimal protection to maintain the sterile barrier with maximum quality under certified cleanrooms conditions is guaranteed. In addition, most of our laminated flexible films can be used as non-porou... -
Product Sycare
Sycare is a pre-fillable syringe in Cop. It is the only one on the market to also have a threaded cap made of COP.
The threaded cap is unique and patented. It provides a remarkable sealing power, combined with an exclusive design. Sycare has been designed to be recognisable and to distinguish t... -
Product Twist Lock
Tight sealing system. Avoiding gasket damage resulting from opening and closing the pail many times. Integrated end-stop. Push to unlock and start rotating.
-
Product PEKUWhite - Cleanroom packaging - PE bags / films / tubes
PEKU Folien - Cleanroom and Pharmaceutical. Your Packaging. Our Passion. Film extrusion, Converting, Co-Packing according ISO 9001 and DIN ISO EN 14644 grade ISO 7 / EU GMP -B in operation, ISO 5/EU GMP- 5 at rest;
PEKUWhite: Tublar film, center folded film, flat film, bottom seam bag, ... -
Product Die-cut Lids (overall and zone-coated)
Oliver offers coated die-cut lidmaterials and custom design options for medical device and pharmaceutical packaging.Lids are fully customizable--including size, design and material selection--for optimal protection and performance.Lid materials include Tyvek®, Ovantex®, papers, films and foils. -
Product Small embeddable RFID micro tag for Syringe, Vial, Cartridge Serialization
Product Brief
The RFID micro tag can be fit on or embedded into any metal/non-metal objects, such as rigid needle shield, and rubber plunger.
This product can be used globally with high performance and reliability.
Why is RFID necessary for Pre-f... -
Product Ophthalmic and lenscare: Tamper-proof dropper bottles
• Bottles with screw-on neck finish • Compatible with Röchling droppers & closures (3 part system) • Dropper Ø from 0,25 mm–1,2 mm (up to 2mm possible) • Tamper-proof closure, various colors available &... -
Product Blister serialization
Although primary pack serialization is not yet a mandatory requirement, it is important to consider the benefits of adopting this technology in view of current healthcare industry production scenarios. Firstly, today the technological evolution of the digital printing industry and the development of new ha... -
Product PET jars
Suitable for primary packaging of Pharmaceuticals. Our plastic PET jars come in various shapes and sizes and also with matching closures. From small Pill jars to large Jumbo jars. Whether it concerns square, round, cylindrical or PET jars with child-resistant closures (CRC), we have the PET jars you are... -
Product Omag Packaging Machine mod. CS Junior
CS Junior packaging machine: different products and stick format sizes in one machine. Thanks to its compact design, this machine is the ideal solution for limited space area, and to pack small batches or to test a new market. In only one square meter you can have up to 3.600 stick/hour on one packaging l... -
Product Romaco Siebler HM 1 Heat Sealing Machine
The Siebler HM 1-230 vertical heat-sealing machine packs pharmaceutical solids in air, light and moisture-tight strip packaging. Configured with eight-lane product feeding, this compact, balcony style machine processes up to 3200 tablets or 1800 capsules per minute. Reproducible sealing parameters... -
Product BFS One-Stop Partner
The Rommelag Group sees itself as a One-Stop Partner for Blow-Fill-Seal Technology and a specialist for flexible Containment Solutions. With our complete solutions for Fill&Finish, we are a strong partner for the pharmaceutical, food, cosmetics and chemical industries. -
Product Go green with Polyfoil® Mono-Material Barrier tube
Europe's FIRST fully approved Mono-Material-Barrier Tube
The pharma grade Polyfoil® MMB is a high-performance tube, offering superior protection. The tube body and shoulder are manufactured in hygienic and pure HDPE with reduced wall thickness. For decoration, Neopac uses ... -
Product Aluminium bottles - T802 tm / T835 tm / O220 tm
• Capacity: between 2.5L and 32L
The T802™ and T835™ ranges are primarily used for packaging and transporting solid products (powders, granules, etc.). This 1050A aluminium packaging is ultra-clean and comes in anodised or plain matte versions. It has high impact, tear and chemical resistance, pro... -
Product DROPPER BOTTLE 100ML
• MEASURES: 100 ml • BRIMFUL CAPACITY: 110 ml • HEIGHT: 104,1 mm • WIDTH: 43,8 • NECK WIDTH: 14,1 mm • WEIGHT: 12,0 gr • BOTTLE NECK: Special • CAP: DROPPER CAP D15 DROPPER 067L021ENC • DROPPER: DROPPER III DROPPER 156L063ENC -
Product Dropper Horizontal 2.2e (DIN18)
Horizontal Dropper 2.2e is used to dispense liquid products from glass bottles of DIN18 bottleneck standard.
Dosing method: the bottle is turned over 120 °, the formation of a drop occurs along the edge of the dropper.Assembled with closure 1.4k.
Pharma grade materials.
Clean room ISO7. qq... -
Product Aclar® - PCTFE
PCTFE laminated films for blister applications • for high to ultra high WVTR barrier demands • Duplex (DX), Triplex (TX) and Sandwich (SW, symmetrical) structures
• Aclar® is a registered trademark of Honeywell International Inc. -
Product DWK Life Sciences Primary Packaging Solutions
DWK Life Sciences is a leading global manufacturer and supplier of glass and plastic primary packaging. Our Primary Packaging container closure systems are manufactured from the highest quality pharmaceutical-grade tubing designed specifically for pharmaceutical, biotech, diagnostic/IVD, and personal ... -
Product Aluminium Aerosol Cans
Nussbaums Aerosol Cans are made of high-quality aluminium and are available in various sizes from Ø22mm up to Ø66mm covering filling volumes from 12ml to 500ml. Common valves are compatible with our one-inch and 20 mm openings. Customers have the choice between various shoulder profiles and we offer a ... -
Product Quality Control for your high quality products
Polycine 's whole manufacturing process is defined within its quality management system, which is certified according to current ISO 9001.
Our own test specifications define a complete series of income inspections, visual, physical and chemical in-process as well as process and finished product controls. -
Product Bottles & Jars
Features of Our Medicine Bottles; • Our Medicine Bottles are produced without human touch via injection blow molding machines in a D Class Clean Room production area, • Our bottles are leak-tight, • Medicine Bottles can be produced in any color desired, • Production is done with... -
Product Single-dose packaging
TekniPlex Healthcare is specialised in the production of strips of single-dose. The strips can size from 0.3 ml up to 10 ml of product and made with different types of plastic, coloured and customised with embossing, pad printing and silk printing.The system features pre-made unit dose vials is a blow fill... -
Product HDPE Bottles
We provide an unmatched combination of product offerings & packages, design & innovation capabilities to leverage new technology & patient insights, & manufacturing expertise in pharmaceutical packaging
To make Berry a part of your Healthcare manufacturing process, plea... -
Product Pharma packaging
Our unrivaled offering includes a wide range of standard products from our leading Cerbo and Jaycare brands, as well as packaging produced to meet specific customer requirements. Nolato is at the forefront of future technologies and develops services and capabilities of significant benefit to our customers... -
Product Tamper-Evident closures TE1
In addition to the ease of handling, the great advantage of our tamper-evident closures is their perfectly visible protection when the product is opened for the first time. We manufacture one-piece, tamper-evident closures as individual components in a single injection-molding process. The advantage is tha... -
Product Pharmaceutical Sticks
The stick formats are increasing in Pharma market both in Paper solution or PET. We are experts in the printing and lamination of this formats offering all the material structures of the market.
We can offer structures with high barrier with and without aluminium, focusing on the migration to sustaina... -
Product Plunger rods made by Pulp-Injection
Customized plunger rods for syringes
Pulp-Injection molded products have similar features and functions as plastic parts, e.g. high rigidness and detailed design options.
Plunger rods made by Pulp-Injection are combinable with
other materials to ensure the function ... -
Product Customized Folding Carton
Customized Folding Carton with insert pocket for product/medical device. -
Product Flip-OFF-SEALS, SAFE DROPPERS, ADAPTERS, MEASURING CUPS, THERMOFORMING B...
SAFE SEALS: DMF Grade Sizes : 13mm, 20mm, 28mm and 32mm
Colours : Can Match any colour per requirement
Finishes : Glossy and Matt. Custom Instruction Printing. Custom Logo Embossing.
Single... -
Product Applicator
What makes an Applicator interesting? • controlled, precise application of the product • accurate control of the product flow by choosing the spring tension, the opening hole and the cover material • suitable for a variety of applications, e.g. acne therapy, insect repellent, sunscreen, pimple treatment ... -
Product Long Life separator System
Long Life is a monodose cap for active ingredients, as probiotics and multivitaminics, that are prone to biodegradation. Long Life is the only one-piece separator cap available on the world market. The structure of Long Life single-dose cap allows a reduction in water activity thanks to the sealing w... -
Product ALUMINIUM PILFER PROOF CAPS
suitable for pilfer proof bottle mouth, and available in diameters from 17 mm up to 38 mm
different colours, different logos different liners or insert (like dessicant)
-
Product Smart wearable to improve patients' life.
Symbioze smart wearable platform is an innovative, large-volume on-body injector to foster patient's adherence. It offers a great combination between design robustness, ease of use, connectivity, and sustainability, for a seamless and enhanced injection experience. -
Product RayDyLyo®
RayDyLyo® is a new standard for vial capping. Alternative solution to aluminum crimped cap, RayDyLyo® is a patented range of plastic press-fit closures, solving long-standing issues in aseptic production from the capping process and from cosmetic defects. RayDyLyo® is a breakthrough innovation, whi... -
Product Vaginal Cream applicators
Union Plastic offers a wide range of pharmaceutical plastic products which includes vaginal cream applicators. Contact us for more information. -
Product Vials made of PP
MEDICOPACK A/S provides a wide range of plastic vials which is including vials made of PP polymer. The material is Medical Grade and fulfills the Ph.Eur. and FDA regulations. PP vials are available in following sizes: 20 ml, 50 ml, 100 ml, 250 ml, 500 ml and 1000 ml. The vials are available in natural and ... -
Product Optimized in all facets to meet your needs
A machine park that is second to noneOur modern machinery comprises almost 18 machines with a clamping force of between 30 and 500 tons. This enables us to design and manufacture your products weighing between 0.5 and 1000 grams. Our development department will be happy to support you in implementing your ... -
Product MK™ Fine Mist Sprayer
Deliver precision dosing and superior spray performance for your Rx and OTC medications. Meet MK™—a fine mist sprayer designed to deliver precision dosing and superior spray performance. With its excellent priming, atomization, and clean output, it delivers an effortless spray experience for consumers. At... -
Product Taste Masked Coated Granules of Clarithromycin & Azithromycin
White to off white tasteless free flowing granules Recommended for Dry Syrup / Suspension -
Product plastic primary packaging
closures and containers for pharmacy, CRC and TE caps, push on TE caps, containers with screw on and push on thread -
Product Metered nasal sprayer (nasal spray pump), screw, snap, crimp on.
ISO 15378. FDA standard. No POM nor Rubber used. Leakage proof. Metered dosage from 0.05ml to 0.14ml. Screw on, Snap on, and Crimp on available.
Position your company at the heart of the global Pharma industry with a CPHI Online membership
-
Your products and solutions visible to thousands of visitors within the largest Pharma marketplace
-
Generate high-quality, engaged leads for your business, all year round
-
Promote your business as the industry’s thought-leader by hosting your reports, brochures and videos within your profile
-
Your company’s profile boosted at all participating CPHI events
-
An easy-to-use platform with a detailed dashboard showing your leads and performance