PharmaSafe® Extraction System

Assist powder flow from rigid ChargeBottle® containers. Ensure maximum yield when handling poorly flowing or sticky powders. Modular clamp can be utilised across multiple containers. Pneumatically powered, this removable vibratory clamp is fitted to containers to assist with discharge of powder produc...

The ability to effectively wash the product contact and sealing areas of a ChargePoint Active valve, process connection nozzle and even further into the process vessel itself, is assured with the use of our specifically designed Wash In Place (WIP) Lance device. The WIP Lance assembly is connected to a sta...

Contained Aseptic Transfer Valves ChargePoint AseptiSafe® aseptic transfer valves offer increased sterility assurance when handling sensitive ingredients and small components in fill/finish aseptic processing and biotech sterile API production.

Powder Transfer Containment Valves ChargePoint PharmaSafe® valves ensure the safer handling of Highly Potent Active Pharmaceutical Ingredients (HPAPI) and other formulation ingredients, offering the highest levels of operator protection through validated containment performance. 

Single Use Split Butterfly Valve Passive  The ChargePoint® SUP is a contained powder transfer interface for pharmaceutical manufacturers that need to economically transfer powder ingredients between process steps or even facilities. The ChargePoint SUP is manufactured with high levels of quality ...

Aseptic Single Use Powder Transfer Bag  ChargePoint’s single use ChargeBag® PE-S is a cost-effective and convenient container for the handling, storage and transfer of bio-pharmaceutical powders. The ChargeBag® PE-S reduces the risks associated with cross contamination and eliminate the time and ...

The Dispensing Funnel is utilised in within powder dispensing operations to accurately fill the transfer bag/container through a ChargePoint® valve. Typically used within a dispensing isolator the funnel leg(s) sit to the side of the open valve disc. Powder is directed either side of the disc and does not ...

Product retention seal for flexible packaging. This simple clip ensures that dispensing and product transfer processes can be undertaken safely by retaining product within the flexible packaging. The clip can be utilised in conjunction with the ChargeBag® or/and a ChargePoint® valve in the following exampl...

Provides security whilst Passive is in storage or transit between process steps. Protects critical sealing interface from damage or compromise with the additional assurance of containment/sterile boundary. Sterilisable by Autoclave and interlocked in place. 

Protect and maintain containment of Active valve. Protect valve while not in use. Maintain containment and secure against accidental use. Prevent contamination of interface. Manufactured from HDPE, the plug locks inside the Active unit and seals against the inner body surface with an O-Ring. 

Protect and maintain containment of the passive valve. Protect valve while not in use or storage. Maintain containment and secure against accidental use. Prevent contamination of interface. Manufactured from plastic, the cover locks over the Passive unit and seals against the valve disc with an O-Ring. 

The ability to effectively wash the product contact sealing areas of a ChargePoint Active valve is assured with the use of our specifically designed Wash In Place (WIP) Passive devices. The WIP Passive / Drain mimics a standard Passive by locking into the Active unit to allow it to be opened within a conta...

Sterile transfer solutions without compromising operational efficiency.

ChargePoint Technology's Chief Commercial Officer says "yes" it can.

The Ritedose Corporation, a contract development and manufacturing organisation (CDMO) with a focus on inhalation and ophthalmic products, has partnered with ChargePoint Technology to ensure the sterility of its drug substance mixing process.