Laboratory homogenising mixer

Product Description

BECOMIX laboratory homogenising mixer in compact design and with intuitive operation – performing the same processes as with large-scale production.

For product and process development, production of clinical samples and pilot scale batches, scale-up.

Compact device with tempering unit, vacuum pump and PLC, everything integrated into a mobile laboratory table.

Only the following connections are needed: electricity (plug), water inlet and water outlet.

BECOMIX

DE
2023

On CPHI since
100 - 249

Employees

Company types

Machinery and Equipment Supplier/Manufacturer

Compare Add to favorites Added to favorites

BECOMIX

DE
2023

On CPHI since
100 - 249

Employees

Company types

Machinery and Equipment Supplier/Manufacturer

Compare Add to favorites Added to favorites

Frequently Viewed Together

Product Synthesis Isolator - Isolator for Synthesis, Filtration and drying

ANFD barrier isolator allows high active product discharge from filter dryers and heel removal for total product recovery. The isolator is directly supported by the filter dryer; installed on a flange fixed on the discharge hatch.Activities are performed by working through glove ports installed on front ...
Product FLUENT® In-Line Heaters

Watlow’s new FLUENT® in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around a tube as part of a thermal system. FLUENT features an all stainless steel construction for a clean, non-contaminating heat source. ...
Product BECOMIX-pre-phase tank (M/MV)

Mixing, melting and storage vessel – optionally available with homogeniser, integrated CIP-system or in unpressurized execution.

Fastest possible tempering and melting of e. g. pellets or block waxes.

For fat and water phases, liquids, solutions, suspensions, eye d...
Product GMP Washer/Dryer

Critical cleaning for your unique processing needs Getinge GEW washer-dryers are designed to meet the growing cGMP requirements of the BioPharmaceutical industry for cleaning of glassware, components and production equipment.
The GEW Series washer/dryers are suitable for many common application...
Product TURBULA®

With the TURBULA series you can produce compounds with the highest quality requirements and excellent reproducibility.

The high mixing efficiency of these 3D shaker mixers results in the shortest mixing times and thus an extremely gentle mixing process. The mixers are easy to operate an...
Product GLOVE BOX

Many laboratory and production applications currently require the availability of a confined space for the enivoronnment and product protection. This Glove Boxes line is a “Fully Modular Line” that allows to configure the system to the different needs of research; the Glove Boxes, made of PMMA (polym...
Product Laboratory equipment

Our laboratory equipment designed for R&D purposes and for the production of small pharmaceutical product batches cover the full manufacturing process: from powder granulation to granule downsizing by means of cone mills and from granule drying to mixing inside small containers.

Proc...
Product Cantilever Laser - Tablet & Capsule Marking Machine

Laser Writing Machine for Mid-sized Pharmaceutical Productions

Versatile, multi-lane laser writing / laser marking machine for tablets and capsules of any shape or size. Also capable of single-sided tablet laser drilling. With output rates of up to 250,000/hour, the Cantilever features use...
Product Process Isolator Technology

Dec develop, design and supply turnkey process integrated containment technology solutions for both potent and aseptic materials.
Product PharmaFocus® Premium Silicone Tubing for Biopharma Applications

PharmaFocus® Premium is fabricated using a premium silicone raw material specifically formulated to meet the demanding requirements of pharmaceutical, bioprocessing, and peristaltic pump applications.
• Standard, Pump, and Braided options • Common sizes in stock, ready to ship / short lead time for n...
Product TS-AS - cGMP Terminal Sterilizer

The Sterilizers type TS-AS are specifically designed for the Terminal Sterilization of liquids contained in sealed containers (plastic bags, glass bottles, BFS bottles, syringes, ampoules, etc...) as they are prepared to provide automatic differential pressure compensation based on product probes (RTD...
Product Marimer COLD rhinopharyngitis single dose

MARIMER BABY Cold Rhinopharyngitis is recommended in infants from birth (non-premature), children and adults cases of colds, rhinopharyngitis.
It decongests the nose by osmotic effect and facilitates the release of nasal secretions, thanks to its hypertonic concentration (22‰)....
Product Smart hearing health

TympaHealth, one of our start-up clients, launched the world’s first all-in-one hearing health assessment system, a portable smartphone-enabled otoscope with accompanying smartphone app. Since then, the novel device has been awarded Gold in the internationally recognised UX Design Awards for its innov...
Product Flp fluid-bed granulator/pelletor

FLP Granulator/Coater/Pelleter is multi-function equipment integrated spray drying-granulating-centrifugal spray coating-fluid coating-drying in one body. The machine combined various process operations. Particularly it is suitable for granulating, pelleting and coating of various varieties in pharmaceutic...
Product KUFill System – An Advanced Flexible Injectables System Integrated with ...

What Advantages KUFill Is Offering

- cGMP Compliance

- Modular Building Interfaces

- Automation, Isolation and Systems Integration

- Flexible and Modular Equipment

- Expandable Factory

- More New Technologies...
Product CLF-IS - Compact laminar flow isolator system

The Compact Laminar Flow Isolator System is a modular cGMP Class A/ISO 5 isolator system specifically designed for safe handling of hazardous compounds (Chemotherapy, Oncological Applications) in hospital pharmacies.
Product Scalable Assembly Platform with Cleanroom Module

The assembly platform was developed in close cooperation with customers from the medical technology sector and meets the GxP regulations for production in the environment of both 21 CFR Part 820 and ISO 13485. Through the deliberate modular design, the highly flexible platform allows customized automation ...
Product Romaco Innojet VENTILUS® mobile Pilot Plant

In over 40 years of innovation Dr. h. c. Herbert Hüttlin improved the core components of the fluid bed system to perfection. Therefore, the patented VENTILUS® technology is currently the highest developed technology in this field and Innojet the right choice for best possible return on invest.The VENT...
Product GPPI (General Processing Platform Isolator)

The Esco General Processing Platform Isolator (GPPI) is a highly adaptable, unidirectional laminar airflow isolator that can be used for sterility testing or other processes that require an ISO Class 5 (Grade A) aseptic environment. The GPPI’s advanced control system allows the operator to select either po...
Product Venrich

Venrich is a bottle top filter product. It is a new interpretation of the disposable bottle top filter. Funnels are mainly made of polystyrene, but Venrich is made of polypropylene, so it does not break easily and has excellent chemical and heat resistance. Most importantly, since the welding process is ex...
Product BIN / DRUM LINE

Our line of Stainless Steel BIN and DRUM are suitable for all handling / manipulation of API and OSD, powders, liquids and viscous in pharmaceutical processes.

Made on standard models and / or according to customer / plant construction spefications, they are durable, solid ans reliable. q...
Product FLECOTEC continuous containment solution

For the many challenges involved in dispensing, discharging, transporting highly sensitive bulk goods, the Flecotec system from Rommelag FLEX has developed an ingenious contained concept that can be ideally adapted to existing processes, requires no recertification and reduces the subsequent cleani...
Product Multi-inspection Platforms

With an increasing product portfolio and a variety of package types, sizes and formulations the requirements for processing and inspecting those products becomes more challenging. There is no test method that can do it all so that is why the combination of several methods is required. The VARIO MTX is a mo...
Product Biotage V-10 Touch Evaporation System

Biotage® V-10 Touch rapidly dries samples dissolved in both aqueous and organic solvents. It easily evaporates HPLC fractions from purification, high boiling point solvents from synthesis and features a dry-down onto silica technique for easier dry load capabilities prior to purification.
V-10 Touch...
Product ROTOTHERM® MINI

The new Artisan ROTOTHERM® MINI thin-film evaporator offers continuous, scalable, and cost-effective separation. Research and development teams can benefit from this new technology preserving product quality, increasing throughput, and saving energy. This equipment has proven successful in drying and ...
Product PWD laboratory filter/dryer

PWD laboratory filter/dryer is designed to fit laboratory scale testing with the functionalities of isolation (solid/liquid separation), washing and drying of specialty compounds (e.g. APIs, fine chemicals etc.). The filter has a filtration area of ca. 0.015m2 and a maximum chamber capacity of ca. 5lit...
Product Incubators

The basic requirement of a microbiological lab is to have an environment that is free from contamination. Laboratory incubators provide this environment that give microbiological cultures, cell cultures and tissue cultures with special conditions regulating viable growth factors such as temperature, ventil...
Product FEP hose

FEP (Fluorinated ethylene propylene) is a fully fluorinated co-polymer of HFP (Hexafluoropropylene) and TFE (Tetrafluoroethylene) with a glaze point of 260 °C (+500 °F).

FEP upper temperature of continuous use is + 205 °C (+ 401 °F), and its chemical stability remains the same compared...
Product Industrial Evaporation

AGI Rotary Evaporator is made for manufacturing applications. With a robust construction, it fulfils the round-the-clock process demands of industrial evaporation application. AGI Rotary Evaporator is available in capacities ranging from 20 L to 200 L. 200 L is the world’s largest size of rotary evapo...
Product Versynta FFP - Flexible Filling Platform

Versynta FFP is based on pre-developed and tested modules that can be flexibly combined. This advanced platform is characterized by the fact that only format parts need to be replaced instead of entire modules. Flexibility in this sense means that the use of different container types as well as different f...
Product prefilled syringe

the prefilled syringe is produced by All-European machine, such as Ambeg, BAUSCH+STROBEL, and OCMI. our annual production capacity is more than 5 millon pcs a year. the prefilled syringe is packed in nest&tub, then sterilized by the Ethylene oxide sterilization
Product REACTOR SYSTEMS BASED ON GLASS-LINED REACTORS WITH JACKET AND GLASS AUXI...

• Operating volume of the glass-lined reactor: from 50 to 5000 l • Volume of glass measuring vessels with a jacket and an agitator from 15 to 100 l • Volume of glass measuring vessels without a jacket from 10 to 300 l • Mounting of glass components on a stainless-steel scaffolding. • Scaffolding...
Product Steam Sterilizer(HPHV)

Machinfabrik industries pvt. Ltd offers a wide range of products which includes steam sterilizer(hphv). Feature: it is available in two basic models - gravity displacement systems and vacuum sterilizers. While gravity displacements systems are suitable only for sterilization of liquids [in open containers]...
Product MINILINE

MINILINE can be configured for any product or container requirement. Furthermore it can be very quickly changed to another format. Start up is immediately at the required production speed, thus giving a high OEE even when running small batches. The GMP design allows for easy cleaning with exceptional v...
Product Pharmatec GmbH Vaccine Manufacturing Line

NEW/NEVER USEDIMMEDIATELY AVAILABLE FROM A CANCELLED PROJECT Complete Pilot Size Vaccine Development Manufacturing Lines Manufacturer: Syntegon Pharmatec GmbH/Germany - 2021

- Pressure Equipment Directive (PED) 2014/68/EU- European GMP (Good Manufacturing Practice) Directives- Vessels pass...
Product RoSS.SHIP: Cold Chain Shipping

RoSS.SHIP secures the cold chain storage and shipping of bulk drug substance for almost one week. With its Smart Tracking & Tracing Add-on you never loose control of your product.

Highly robust, stackable, coolable and compact – RoSS.SHIP cold chain shipping container is like Fort ...
Product Laboratory Sterilizers/Autoclaves

Our autoclaves range from horizontal benchtop units, to vertical top-loading units, to freestanding units. The line includes a wide range of models from our economic manually controlled analog models to our electronically controlled models with a build- in printer for GLP-compliant documentation.
q...
Product Process Vessels, Reactors and Process Systems

Stainless Steel Process VesselsSince 1975, Pope has provided stainless steel process vessels to industrial and academic research laboratories and industries of all kinds. Beginning with standardized pressure vessels for holding and dispersing solutions, Pope over the years, also offered special vessels, re...
Product Portable Vane Anemometer

The portable Handheld Anemometer is a electronic instrument, designed with totally indigenous technical know-how and components. It directly reads the rate of flow of air/gases, eliminating the need to import such instruments. Optional facility for Air temperature measurement can be incorporated in the...
Product Capacity 6000L Glass Lined Reactor with Motor, Agitator, Mechanical Seal...

1. Application:
Capacity 6000L Glass Lined Reactor With Motor,Agitator,Mechanical Seal Etc. is an ideal material for anti acid and alkali corrosion and its surface is very easy to Polish and no contamination to mediums. It's widely used in Petrochemicals, light
industry, pharmaceut...
Product ScanStation® 200

Real-time incubator and colony counter
for 200 petri capacity
Product Essentia

Essentia opens a new generation of capsule filling machines, perfection made easy. Inspired by a human-centered approach (HCD), the machine has been designed for users who search for perfect capsule filling, ergonomics and attractive price, all combined in one capsule filling machine. Essentia offers the b...
Product Visual Inspection Table CLEANVIEW©

The luminous intensity of the new CleanView manual inspection table is ensured by independently adjustable LED strips which allow a more homogeneous luminous intensity than neon lights, more economical and ecological with a lifespan of + 20 000 hours visual inspection.

The design of th...
Product QUALIFICATION OF PROCESS EQUIPMENT

Even if the qualification of the equipment is probably the activity practiced by the greatest number of institutions of the most varied types (consultants, builders, fonitors, ...), Adeodata stands out for a structured approach based on experience, continuous updating and organization that guarantee an ...
Product Non-PVC Soft-bag Form-Fill-Seal Machine other api equipment

RSY series Non-PVC Soft-bag Form-Fill-Seal Machine is developed on the basis of domestic and abroad advanced technology and experiences. This machine adopts PLC to control the whole process with the advantages of automatic control, high technology and great function.
Product NTG Series Pharma Lifter,Stationary

Canaan offers a wide range of blender series products which includes ntg series pharma lifter,stationary. Application: it is mainly used in the solid dosage production procedure for transferring and discharging materials, consequently it is operated with corollary equipments such as granulator, blende...
Product uniclave - lab pressure reactor

This multipurpose pressure reactor system is designed for the use of interchangeable glass and steel pressure vessels. Safety features guarantee safe reactions under pressure. The polycarbonate door of the uniclave housing also allows glass pressure reactors up to 12 bar to be used safely and with&nbs...
Product CBL Systems with AdaptShield

AdaptShield is a new device that optimally manages the functioning of CBL systems by guaranteeing the automatic protection of the BCA lobe pump and the primary lubricated pump in case of critical events such as loss of performance and over temperature.
Thanks to the self-adaptive control, Adap...
Product Complete ChemRxnHub™ Systems with Tool-Free Jacket Connections

ChemRxnHub single, dual and triple reactor system workstations in 300mL to 5 liter configurations. Great for those who need complete, off-the-shelf systems that are quick to assemble, easy to operate and low on maintenance. The unique design of the ChemRxnHub support stand and clamping system allows for ea...
Product Pharma Reaction System

The Pharma Reaction System is designed in a compact layout for standardized capacities from 16 to 63l. Systems combining a glass-lined vessel with a glass dome for perfect observation of the process can be realized up to 630l.

It is specially designed for two process stages: reacti...