FLUENT® In-Line Heaters
Product Description
Watlow
-
US -
2023On CPHI since
-
3Certificates
-
1000 - 4999Employees
Company types
Primary activities
Categories
Watlow
-
US
-
2023On CPHI since
-
3Certificates
-
1000 - 4999Employees
Company types
Primary activities
More Products from Watlow (2)
-
Product FIREROD® Cartridge Heaters
FIREROD® cartridge heaters are designed for medical equipment including baby incubators and kidney dialysis machines and injector ports. Incorporating engineering excellence and supported by more than half a century of solid industry performance, Watlow’s FIREROD cartridge heater is an excellent soluti... -
Product Digital Engineered Solutions for Environmental Monitoring Systems
Eurotherm DES for EMS are designed to aid compliance to FDA 21 CFR Part 11, EudraLex Annex 11, and Good Practice guidelines. From an entry-level architecture based on Eurotherm self-contained recorders, to a high availability architecture including redundant instrumentation, virtualized servers, cybersec...
Watlow resources (1)
-
Video Watlow vision for Life Sciences. We start with compliance.
Focused on key applications and following Quality by Design (QbD) principles, we continue to invest in the development of digital engineered solutions (DES) to aid GMP, regulatory compliance and efficiency optimization and help reduce capital project execution costs, risks and time to market, as well as offering services that help lower operational expenditure.
Recommended Products
-
Product Universal homogenising mixer (RW)
BECOMIX universal homogenising mixer for products with low to very high viscosities.
Versatile universal mixer for liquids and semi-solids.
For creams, ointments, gels, toothpastes, lipsticks, mascaras, shampoos, conditioners, etc.
Individually configurable for all applications and pre...
-
Product OctoPlus FF® Simplifies The Setup of Your Filling Line
Secure Your Final Filling
OctoPlus FF® provides a completely single-use alternative to traditional stainless steel “break tank “or “buffer tank” systems in a wide range of applications. OctoPlus FF® can be configured with a large variety of components and connectors.
-
Product Securing Sterile Transfer - DPTE® System (DPTE® Alpha, DPTE-BetaBag®, DP...
The types of components that can be used for incoming transfers include - but are not limited to - plugs, syringes, pistons, capsules, injectors, stoppers, caps, bottles and plungers, and other medical products as well as toxic/potent products. Outgoing transfers include samples, miscellaneous equipment...
-
Product Qmills series - R&D and laboratory
The R&D QMill isengineered to meet the requirements of R&D labs, where new product are developed and micronization process is requested on small quantities (from minimum 1g to few kgs).
All connections of components are made to be in compliance with cGMPs and to assure quick a...
-
Product MC DecJet® Spiral Jet Mills
The new 4th generation MC DecJet® systems stand for: • Narrow Particle Size Distribution (PSD)
• Simple and rapid assembly/disassembly • Limited number of components • High yields • Low energy consumption • Sterile manufacturing • PSD scalability with all MC DecJet® models
-
Product Multi-inspection Platforms
With an increasing product portfolio and a variety of package types, sizes and formulations the requirements for processing and inspecting those products becomes more challenging. There is no test method that can do it all so that is why the combination of several methods is required. The VARIO MTX is a mo...
-
Product MIXER / DISSOLVER
Our line of stainless steel mixer/dissolvers is suitable for all pharmaceutical application fields, the systems are fully customizable according to user needs.
There are many combinations, mixing, dissolution and thermoregulation of the product, liquid analysis, weighing and dosing us...
-
Product Aseptic Fill and Finish Processing
Offering table top units for small batches up to customized high speed fully automated robotic production Filling and Capping Lines for syringes, cartridges, vials, bottles, ampoules, IV bags and various other containers.
• Cleaning • Sterilizing • Filling • Lyophilization • Closing •...
-
Product SPEEDY GLOVE - Automatic portable Intergity Glove Tester
Speedy Glove is a battery-powered glove tester that performs leak testing on gloves installed on isolators or RABS where a strict separation between the isolated area and the external environment is required. The system performs pressure decay integrity tests that comply with the requirements of IS...
-
Product MTG Clearway Platinum®
The MTG Clearway Platinum® hose is wire-reinforced and made with high-purity platinum-cured silicone. The hose meets the USP VI, FDA, 3-A and BfR requirements. Designed for low to medium pressure and vacuum applications. Produced in an ISO 14644-1 class 8 cleanroom manufacturing facility in productio...
-
Product VIP Laser - Tablet & Capsule Laser Marking Machine
Single lane, multi-functional Class 1 Laser writing / marking / etching machine. With output rates of up to 60,000/hour, the VIP works with tablets, capsules, caplets and softgels of any shape and size. User friendly operation handles multiple product recipes and features simple to change carrier links for...
-
Product GLOVE BOX
Many laboratory and production applications currently require the availability of a confined space for the enivoronnment and product protection. This Glove Boxes line is a “Fully Modular Line” that allows to configure the system to the different needs of research; the Glove Boxes, made of PMMA (polym...
-
Product Semi-Automatic Pilot Assembly Machine
This versatile semi-automatic assembly machine is designed for efficient production of small to medium-sized batches, making it ideal for clinical testing and pre-industrialization phases. It can also handle complex-shaped parts introduction or low volume production. With a robust capacity of 700 pieces pe...
-
Product TS-AS - cGMP Terminal Sterilizer
The Sterilizers type TS-AS are specifically designed for the Terminal Sterilization of liquids contained in sealed containers (plastic bags, glass bottles, BFS bottles, syringes, ampoules, etc...) as they are prepared to provide automatic differential pressure compensation based on product probes (RTD...
-
Product Essentia
Essentia opens a new generation of capsule filling machines, perfection made easy. Inspired by a human-centered approach (HCD), the machine has been designed for users who search for perfect capsule filling, ergonomics and attractive price, all combined in one capsule filling machine. Essentia offers the b...
-
Product PWD production filter/dryer
PWD production filter/dryer is designed to fit production scale operations with the functionalities of isolation (solid/liquid separation), washing and drying of specialty compounds (e.g. APIs, fine chemicals etc.).
The filtration area and the chamber size can be adjusted to the needs of the producti...
-
Product Inline SIVTEK-Safety Sieving or Check Screening
Get better efficiency and higher capacity with low headroom separator!The Inline SIVTEK® a Low Profile Separator offers high capacities of wet or dry scalping in a low headroom design. The low profile separator has a single vertically mounted motor to generate a sifting motion across the screen plane.
...
-
Product Incubators
The basic requirement of a microbiological lab is to have an environment that is free from contamination. Laboratory incubators provide this environment that give microbiological cultures, cell cultures and tissue cultures with special conditions regulating viable growth factors such as temperature, ventil...
-
Product Fermentation Probe Sensor
The ASD12-N and ASD25-N absorption sensors are designed for use in pilot and production scale fermenters or bioreactors to precisely measure the growth of microbial or cell cultures as a function of NIR absorption.
-
Product HSA 120
The HSA 120 equipment belongs to a family of non-destructive analyzers intended for monitoring headspace gas compositions in optically transparent and sealed containers. It employs a non-invasive laser-based technique for monitoring the headspace levels of gases such as oxygen, carbon dioxide and moist...
-
Product FEP hose
FEP (Fluorinated ethylene propylene) is a fully fluorinated co-polymer of HFP (Hexafluoropropylene) and TFE (Tetrafluoroethylene) with a glaze point of 260 °C (+500 °F).
FEP upper temperature of continuous use is + 205 °C (+ 401 °F), and its chemical stability remains the same compared...
-
Product Pharmacovigilance - PvEdge - AI Enabled Drug Safety Database Suite
AI-enabled, cloud-ready,360 pharmacovigilance solution for safety database management. An end-to-end globally compliant safety software for Drugs, Devices, Vaccines and Combinational products from case intake to submissions and reporting. • Case Intake • Case Processing • Case Submission • Risk Manage...
-
Product Biotage V-10 Touch Evaporation System
Biotage® V-10 Touch rapidly dries samples dissolved in both aqueous and organic solvents. It easily evaporates HPLC fractions from purification, high boiling point solvents from synthesis and features a dry-down onto silica technique for easier dry load capabilities prior to purification.
V-10 Touch...
-
Product Process Vessels, Reactors and Process Systems
Stainless Steel Process VesselsSince 1975, Pope has provided stainless steel process vessels to industrial and academic research laboratories and industries of all kinds. Beginning with standardized pressure vessels for holding and dispersing solutions, Pope over the years, also offered special vessels, re...
-
.jpg)
Product RoSS.SHIP: Cold Chain Shipping
RoSS.SHIP secures the cold chain storage and shipping of bulk drug substance for almost one week. With its Smart Tracking & Tracing Add-on you never loose control of your product.
Highly robust, stackable, coolable and compact – RoSS.SHIP cold chain shipping container is like Fort ...
-
Product logidrive -Cost savings through reduction of geared motor versions
LOGIDRIVE is an energy efficient, maintenance-friendly and standardized solution for intralogistics and airport applications. The solution consists of an efficient gearbox, IE4 permanent magnet synchronous motor and a decentralized variable frequency drive. Gear unit standardization minimize...
-
Product AUTOCOATER
•All the product contact parts are made from Stainless Steel corresponding to 316 •Pan speed 1 to 15 RPM, The pan speed is variable and can be changed from the control panel. •Perforated pan with more than 55% opening for better quality finish The pan is cylindrical in shape and is m...
-
Product Laboratory equipment
Our laboratory equipment designed for R&D purposes and for the production of small pharmaceutical product batches cover the full manufacturing process: from powder granulation to granule downsizing by means of cone mills and from granule drying to mixing inside small containers.
Proc...
-
Product Automatic Tablet Coater
Ideal for automated Tablet Coating mainly used in Pharmaceutical and Food Industries confirming to the requirement of cGMP. It is a energy saving, safe and clean equipment for Film and Sugar Coating of Tablets, Pills and Candies with Organic Film, Aqueous Coating and Sugar Film etc.
-
Product QUALIFICATION OF PROCESS EQUIPMENT
Even if the qualification of the equipment is probably the activity practiced by the greatest number of institutions of the most varied types (consultants, builders, fonitors, ...), Adeodata stands out for a structured approach based on experience, continuous updating and organization that guarantee an ...
-
Product SENSORS & THERMOCOUPLES
Radix Sensors are built-to-order. With our years of expertise in the sensors & gauges industry, • RTDs (PT100, PT1000 etc), • Thermocouples, • Level measuring • Thermowells
We provide products suited for hundreds of unique applications in hazardous and non-hazardous sensor-envi...
-
Product UV Light Blocking Tyvek Equipment Covers
UV Light Blocking Tyvek Equipment Covers are designed to keep cleaned pharmaceutical equipment and supplies clean and protected from external sources of contamination while also providing in-process protection to light sensitive biotech products.
-
Product ePAT - enhanced double jacketed reactor
ePAT is a quick, easy controlled lab reactor solution for automating double jacketed reactors for research and development. It provides a cost-effective entry route into automation technology, allowing users to optimize their synthesis and processes for both scale-up and scale-down.
Comb...
-
Product TURBULA®
With the TURBULA series you can produce compounds with the highest quality requirements and excellent reproducibility.
The high mixing efficiency of these 3D shaker mixers results in the shortest mixing times and thus an extremely gentle mixing process. The mixers are easy to operate an...
-
Product Anti-bacterial polyurethane floors - Poliucem
This polyurethane coating offers excellent mechanical and chemical resistance while also inhibiting 99.9% of bacterial proliferation. The properties of Poliucem floors are: • thicknesses of between 4 and 9 mm for a jointless, matt finish • contains an anti-bacterial additive that makes it particular...
-
Product Contained vacuum drying
Contamination is unacceptable and the cGMP Nauta vacuum dryer is a proven technology for excellent cleaning (CIP) and sterilising (SIP) in place. It has a closed process vessel with a cover and filter made out of one piece. This eliminates dead spots and offers validated automatic SIP/CIP. There are no oil...
-
Product ASEPTiCell
ASEPTiCell is an aseptic fill-finish system specifically designed for cGMP filling of sterile injectable products. The ASEPTiCell integrates industry proven technologies such as robotics and isolator-barrier systems to provide the most technologically advanced system for filling pre-sterilized vials, syrin...
-
Product Portable Vane Anemometer
The portable Handheld Anemometer is a electronic instrument, designed with totally indigenous technical know-how and components. It directly reads the rate of flow of air/gases, eliminating the need to import such instruments. Optional facility for Air temperature measurement can be incorporated in the...
-
Product CLF-IS - Compact laminar flow isolator system
The Compact Laminar Flow Isolator System is a modular cGMP Class A/ISO 5 isolator system specifically designed for safe handling of hazardous compounds (Chemotherapy, Oncological Applications) in hospital pharmacies.
-
Product Industrial Rotary Evaporators
Excellent user safety with high-impact transparent PMMA doorNon-fogging safety glass and metal frame guard hood provides excellent user protection
The evaporation flask is illuminated during operation for increased visibility
Universal heating bath accommodates water or other bath fluids allowing for...-comp308436.png)
-
Product NEW Hybrid Model 700 Series Blow Fill Seal Machine
Filling range 0.1mL - 2000mL
100 % Stainless SteelHighest quality parts
Tooling manufactured in the same facility
-
Product FIREROD® Cartridge Heaters
FIREROD® cartridge heaters are designed for medical equipment including baby incubators and kidney dialysis machines and injector ports. Incorporating engineering excellence and supported by more than half a century of solid industry performance, Watlow’s FIREROD cartridge heater is an excellent soluti...
-
Product EPDM Glove - PIERCAN
EPDM glove can be used in Isolators, RABS and Gloveboxes. With excellent chemical, ozone and UV resistance, excellent resistance to sterilizing agents (VHP, autoclave and gamma irradiation) and in compliance with FDA CFR 21 177.2600, this PIERCAN glove has various applications in the Life Science (Pharmace...
-
Product KUFill System
Shanghai tofflon science & technology co. Ltd offers a wide range of filling lines which includes ampoule filling line. Features: it is integrated with washing machine, sterilizing tunnel, filling and sealing machine, it reduces any potential contamination risk from human operation. Contcat us for more...
-
Product New Oil-Free Rotary Vane Pumps Series
New Oil-Free Rotary Vane Pumps with improved noise level, vanes life and heating/temperature conditions. Oxidation resistance greatly increased thanks to NPO termochimical heat treatment. Moreover, easier maintenance: vanes replacement without carter disassembling.
-
Product Containment & Aseptic Barrier Isolator Systems
n the global pharmaceutical market with the ever growing demands on materials, operator and environmental protection, consideration toward increasing standards of safety, sterility assurance and regulatory compliance has never been higher.
As applications expand into less traditional are...
-
Product Purified Water Storage Tank
Customer specific storage tank to be used as a part of a sterile Purified Water Production, Storage and Distribution system without recontamination
-
Product Fluid Bed Dryers ESSICA
Essicca fluid bed dryer introducestwo very important practicalconcepts:1- Optimization of the dryingprocess: Defines theoptimum air flow for a granulatebased on the determination of theVMF (minimum fluidization speed).2- Automation of the dryingprocess: It makes the drying processof the operator independen...
-
Product Aseptic Split Butterfly Valve - ChargePoint AseptiSafe®
Contained Aseptic Transfer Valves ChargePoint AseptiSafe® aseptic transfer valves offer increased sterility assurance when handling sensitive ingredients and small components in fill/finish aseptic processing and biotech sterile API production.
Recently Visited
Position your company at the heart of the global Pharma industry with a CPHI Online membership
-
Your products and solutions visible to thousands of visitors within the largest Pharma marketplace
-
Generate high-quality, engaged leads for your business, all year round
-
Promote your business as the industry’s thought-leader by hosting your reports, brochures and videos within your profile
-
Your company’s profile boosted at all participating CPHI events
-
An easy-to-use platform with a detailed dashboard showing your leads and performance