Medical Grade 1073B Tyvek Sterilization Wrap

Ready to use gamma irradiated trash bags make it easy to remove waste from pharmaceutical production areas without introducing potential sources of contamination. Gamma irradiated. Ready to use. Packaged in easy to open Tyvek® peel pouches. These polyethylene bags are a convenient way to hold refuse or other items for removal from an aseptic production area.

A great tool to collect and protect media plates inside the isolator after sampling is completed and during their transfer to the QC lab for incubation.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Sterile Biohazard Bags are useful to decontaminate waste or potentially hazardous materials that are exiting the aseptic production area through the autoclave.

These 2-ply wraps make wrapping quick and easy. These are designed for use in steam, ethylene oxide and hydrogen peroxide sterilization processes.

Can be sterilized in 135 degree C autoclave cycles. Creates secondary level of protection during aseptic presentation and setup of filling equipment.

Heavy Duty SMS Muffs eliminate the need for cutting sheets of sterilization wrapping materials and securing them with autoclave tape and rubber bands.

Designed for higher temperature steam sterilization cycles (135°C). A significant improvement versus cutting and wrapping with sheets and autoclave tape.

These 2-ply wraps make wrapping quick and easy. These are designed for use in steam, ethylene oxide and hydrogen peroxide sterilization processes.

A significant upgrade over paper-based steam sterilization pouches. These peel pouches will not rip or puncture like paper-based autoclave pouches routinely do.

Provides a convenient, time-saving method of wrapping stopper bowls prior to steam sterilization. Significant improvement compared to sheets and autoclave tape.

Save time and standardize the activities in equipment preparation for sterilization. GHD Muffs provide a convenient means to cover flasks, beakers, containers.

Protect your media plates from false positives with this innovative design.

Prevent unwanted skin exposure with this innovative sterile facemask design.

Prevent the aseptic operator's goggles from fogging with this innovative design that also eliminates any potential skin exposure.

Provides a convenient, time-saving method of wrapping stopper bowls prior to steam sterilization. Significant improvement compared to sheets and autoclave tape.

Blue Bio-Shield sterilization wrap is an economical way to wrap items for steam sterilization.

Significant process improvement compared to wrapping with BioShield paper. Eliminates the need to cut material and the use of particulating autoclave tape.

Protect your filling needles from microbial contamination during the aseptic set up of the filling machine.

Ideal for the sterilization of pharmaceutical components like stoppers, caps & equipment parts with sharp edges. No need for a heat sealer or autoclave tape

Protect light sensitive biotech products from damaging UV light with these form fitting GMP covers.

For the steam sterilization of pharmaceutical production equipment. Cut and seal to desired length -size flexibility. Peels open without generating particles.

Super Duty SMS Stopper Bowl covers eliminate the need for cutting sheets of sterilization wrapping materials and securing them with autoclave tape.

Super Duty SMS Muffs eliminate the need for cutting sheets of sterilization wrapping materials and securing them with autoclave tape and rubber bands.

Standardize the way equipment is wrapped for steam sterilization. Saves valuable time in the equipment prep areas. No need for a heat sealer or autoclave tape.

Economical. We offer a large range of sizes, including larger sizes which are not available from other companies.

In addition to steam sterilization, also compatible with gamma, EtO, and VHP modalities. Easy closure via the self-seal and peels open cleanly via the Chevron.

Designed for isolator applications. These Tyvek Bags feature a hang hole to suspend the steam sterilized items in the isolator for VHP surface decontamination.

Each closure incorporates latex-free rubber elastic to create a positive seal around round shaped openings with the addition of a 2" long skirt extension.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®. The clear side/window verifies parts are dry. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Made from 1421B DuPont™ Tyvek®, a new grade of uncoated, untreated material. Designed for pharmaceutical use. No anti-stat residues left behind on equipment.

Save time in equipment preparation. Each closure incorporates a Tyvek® drawstring closure to create the tightest possible seal around all openings.

Ready to use sterile cleanroom pens and markers eliminate the risks associated with surface sanitization procedures.

Pre-Sterilized, Self-Sealing, Sterility Maintenance Covers are used to cover wrapped items after sterilization to provide protection from external contamination

Easy-Tear Tyvek bags are designed to satisfy the most stringent requirements in the sterilization of critical pharmaceutical equipment and components.

Designed for the steam sterilization of pharmaceutical production equipment and components (stoppers and caps). Cut and seal to desired length -size flexibility

All 1073B Tyvek Tubing provides sizing flexibility for steam sterilizing pharmaceutical equipment parts.

Medical Grade 1073B Tyvek autoclave bags provide a superior microbial barrier and resist tears and punctures better than any other sterilization wrap material.

Designed for the steam sterilization of pharmaceutical production equipment and components (stoppers and caps). Exceptional microbial barrier. Multiple sizes i

Clear integrated window in the stopper bowl cover allows the aseptic operator to verify the inside of the stopper bowl is dry before use.

Recommended for Steam Sterilization of Pharmaceutical Production Equipment. Cut to desired length -size flexibility. Cost Effective. Superior microbial barrier

The drapeable nature of the 1422A Tyvek® material is ideal for wrapping equipment parts where one may need to "feel through" the bag to lift heavy items.

Significant process improvement compared to wrapping with BioShield paper. Eliminates the need to cut material and the use of particulating autoclave tape.

The soft yet tough drapeable nature of this Tyvek material makes it an ideal choice for irregular shapes that have sharp edges that can damage inferior material

Save time and standardize the activities in equipment preparation for sterilization. Tyvek Muffs provide a convenient means to cover flasks, beakers, containers

Protect your filling needles from accidental touching after they are removed from the primary sterilization packaging. Creates secondary level of protection.

Keep cleaned equipment such as carts, racks and other pharmaceutical production equipment protected from external sources of contamination.

Standardize and simplify the way equipment is wrapped for steam sterilization. These drawstring bags will also save valuable time in the equipment prep areas.

Protect cleaned pharmaceutical equipment, such as tanks, vessels and bioreactors from particulates and external sources of microbial contamination.

Protect your filling needles from contamination after they are removed from the primary packaging. Creates secondary level of protection during aseptic setup.

Extra Large Gamma Irradiated cleanroom facemasks with Tyvek® side extensions with Fog Prevention expand the coverage and prevent unwanted facial skin exposure.

Autoclavable Tyvek® Muffs provide a convenient means to cover flasks, beakers, containers, media bottles, valves, pipes, and hoses for steam sterilization.

Use GMP Covers to protect cleaned equipment in all pharmaceutical manufacturing environments, helps minimise microbial and particulate contamination risks.

These are a good choice for heavy, or pharmaceutical change parts with sharp corners or where visibility into the bag is required after sterilisation.

Pre-sterilized pens and markers eliminate the risks with surface sanitisation procedures. 'Ready to Use Option' when sterilisation on-site is unavailable.

Ready to use pre-sterilised trash bags make it easy to remove waste from pharmaceutical production areas without introducing potential sources of contamination.

Reduce the number of janitorial steam sterilisation loads by using gamma irradiated mop bucket liners. Ensures sterile receptacle for solution each time.

Grey Tyvek covers block UV light, which can damage light sensitive biotech products. Use these GMP covers in any pharmaceutical manufacturing setting.

Standardise and simplify the way equipment is wrapped for steam sterilisation. Self-sealing bags will also save valuable time without a need for a heat sealer.

The drapeable nature of the Flexible Tyvek® material in drawstring bags is ideal for wrapping equipment parts where one may need to 'feel through' the bag.

SMS wrappers provide an excellent microbial barrier. Ideal for pharmaceutical production applications. Manufactured and packaged in a certified ISO 8 cleanroom.

Green, GHD muffs provide a convenient means to cover flasks, beakers, containers, media bottles, valves, pipes and hoses for steam sterilization.

Blue, BHD muffs provide a convenient means to cover flasks, beakers, containers, media bottles, valves, pipes and hoses for steam sterilization.

Extra Large Gamma Irradiated cleanroom facemasks with Tyvek® side extensions expand the coverage and prevent unwanted facial skin exposure.

Tyvek Breather Bag Tubing is compatible with steam, ETO, gamma and irradiation sterilization processes.

Easy-Tear Feature for easier opening and sealing.  No sterile cutting instruments required to open the bag.  Low particle generation when opening via the Easy-Tear.  Manufactured and packaged in a certified ISO 6 cleanroom. Designed for the steam sterilization of pharmaceutical production equipment and components (stopper and caps).The 1073B Tyvek® side permits steam penetration. Robust factory seals.  Semi-transparent HDPE film side. Exceptional microbial barrier. Certificates of Conformance sent with all shipments. Also compatible with gamma irradiation, V2H2O and EtO sterilization